201 Exam Dumps, 201 Practice Test Questions [Q101-Q125]

4/5 - (1 vote)

201 Exam Dumps, 201 Practice Test Questions

PDF (New 2026) Actual F5 201 Exam Questions

Q101. A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?

Interfaces

Network routes

VLANS

IP addresses

Q102. All pool members are online. All other virtual server settings are at default What might after the load balancing behavior?

enabing SNAT automap

enabing a falback host in the http profile

adding a oneconnect profile

adding a persistence profile

Q103. Refer to the exhibit.

A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?

The BIG-IP Administrator is NOT logged into command line to tail over

The BIG-IP Administrator is on the Standby Device

The BIG-IP Administrator is logged in as root

The BIG-IP Administrator is logged in as administrator

Q104. A web server administrator informs the BIG-IP Administrator that web servers are overloaded Starting next month, the BIG-IP device will terminate SSL to reduce web server load. The BIG-IP device is ready using client SSL client profile and Rules on HTTP level. What actions should the BIG-IP Administrators to achieve the desired configuration?

Remove the server SSL profile and configure the Pool Members to use HTTP

Remove the client SSL profile and configure the Pool Members to US HTTP

Remove the chart SSL profile and change the Virtual Server to accept HTTP

Remove the server SSL profile and change the Virtual Server to accept HTTP traffic

Q105. Monitors can be assigned to which three resources? (Choose three.)

NATs

pools

iRules

nodes

SNATs

pool members

virtual servers

Q106. The incoming client IP address is 205.12.45.52. The last five connections have been sent to members C, D, A, B, B. Given the virtual server and pool definitions and the statistics shown in the graphic, which member will be used for the next connection?

10.10.20.1:80

10.10.20.2:80

10.10.20.3:80

10.10.20.4:80

10.10.20.5:80

Q107. An ecommerce company is experiencing latency issues with online shops during Black Friday’s peak season.
The BIG-IP Administrator detects an overall high CPU load on the BIG-IP device and wants to move the top utilized Virtual Servers to a dedicated BIG-IP device.
Where should the BIG-IP Administrator determine the problematic Virtual Servers?

System > Plattform

Local Traffic > Virtual Servers > Virtual Server List

Local Traffic > Network Map

Statistics > Module Statistics > Local Traffic > Virtual Servers

Q108. A BIG-IP Administrator runs the initial configuration wizard and learns that the NTP servers were invalid. In which area of the Configuration Utility should the BIG-IP Administrator update the list of configured NTP servers?

System > Configuration

System > Services

System > Preferences

System > Platform

Q109. A BIG-IP Administrator needs to have a BIG-IP linked to two upstream switches for resilience of the external network. The network engineer who is going to configure the switch instructs the BIG-IP Administrator to configure interface binding with LACP. Which configuration should the administrator use?

A virtual server with an LACP profile and the switches’ management IPs as pool members.

A virtual server with an LACP profile and the interfaces connected to the switches as pool members.

A Trunk listing the allowed VLAN IDs and MAC addresses configured on the switches.

A Trunk containing an interface connected to each switch.

Q110. When can a single virtual server be associated with multiple profiles?

Never. Each virtual server has a maximum of one profile.

Often. Profiles work on different layers and combining profiles is common.

Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.

Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.

Q111. Refer to the exhibit.

A BIG-IP Administrator configures the Virtual Server to pass HTTP traffic. Users report that they are unable to access the application What should the administrator do to resolve this issue?

Change the Virtual Server name

Disable .he State

Reconfigure the Source Address

Reconfigure the Pool Members

Q112. Which two can be a part of a virtual server’s definition? (Choose two.)

rule(s)

pool(s)

monitor(s)

node address(es)

loadbalancing method(s)

Q113. Refer to the exhibit.

How long will the persistence record remain in the table?

180 seconds after the last packet

180 seconds after the initial table entry

300 seconds after the initial table entry

300 seconds after the last packet

Q114. Which three properties can be assigned to nodes? (Choose three.)

ratio values

priority values

health monitors

connection limits

loadbalancing mode

Q115. Which statement is true regarding failElover.

Hardware failElover is disabled by default.

Hardware failElover can be used in conjunction with network failover.

If the hardware failElover cable is disconnected, both BIGElIP devices will always assume the active role.

By default, hardware faElilover detects voltage across the failElover cable and monitors traffic across the internal VLAN.

Q116. A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity.
The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?

Round Robin

Dynamic Ratio

Ratio

Least Connection

Q117. A BIG-IP Administrator needs to check the memory utilization on a BIG-IP system. Which two methods can the UIG IP Administrator use? (Choose two.)

Run the tmsh show/sys memory command

Run the tmsh show/sys traffic command

Go to Statistics > Module Statistics > Traffic Summary in the configuration utility

Go to Statistics > Module Statistics > Memory in the configuration utility

Go to System > Disk Management in the configuration utility

Q118. The owner of a web application asks the 8IG-IP Administrator to change the port that the BIG-IP device sends traffic to. This change must be made for each member in the server pool named app_pool for their Virtual Server named app_vs. In which area of the BIG-IP Configuration Utility should the BIG-P Administrator make this change?

Local Traffic > Pools

Local Traffic > Nodes

Network > Interfaces

Local Traffic > Virtual Servers

Q119. Refer to the exhibit.

During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

The Tag voice on the Standby device

The interface on the Active device to 1.1

The Tag value on the Active device

The Interface on the Standby device to 1.1

Q120. Assume a virtual server is configured with a ClientSSL profile. What would the result be if the virtual server’s destination port were not 443.

SSL termination could not be performed if the virtual server’s port was not port
443.

Virtual
servers
with a
ClientSSL
profile
are
always
configured
with a destination port of 443.

As long as client traffic was directed to
the alternate port, the virtual server would work as intended.

Since the virtual server is associated with a ClientSSL profile, it will always process traffic sent to port 443.

Q121. A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server? (Choose two.)

TCP

HTTP

HTTPS

ClientSSL

ServerSSL

Q122. Which statement is true concerning cookie persistence.

Cookie persistence allows persistence independent of IP addresses.

Cookie persistence allows persistence even if the data are encrypted from client to pool member.

Cookie persistence uses a cookie that stores the virtual server, pool name, and member IP address in clear text.

If a client’s browser accepts cookies, cookie persistence will always cause a cookie to be written to the client’s file system.

Q123. Refer to the exhibit.

An organization is reporting slow performance accessing their Intranet website, hosted in a public cloud. All employees use a single Proxy Server with the public IP of 104.219.110.168 to connect to the Internet. What should the BIG-IP Administrator of the Intranet website do to fix this issue?

Change Source Address to 104.219.110.168/32

Change Load Balancing Method to Least Connection

Change Fallback Persistence Profile to source_addr

Change Default Persistence Profile to cookie

Q124. Assume a client’s traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, What changes, if any, would take place when the BIG-IP processes such packets?

The BIG-IP would drop the request since the traffic didn’t arrive destined to the NAT address.

The source address would not change, but the destination address would be changed to the NAT address.

The source address would be changed to the NAT address and destination address would be left unchanged.

The source address would not change, but the destination address would be changed to a self-IP of the BIG-IP.

Q125. The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available. If a pool is marked available (green) which situation is sufficient to cause this?

All of the pool member nodes are responding to the ICMP monitor as expected.

Less than 50% of the pool member nodes responded to the ICMP echo request.

All of the members of the pool have had their content updated recently and their responses no longer match the monitor.

Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.