[Jun-2022] Latest Salesforce OMS-435 exam dumps and online Test Engine [Q34-Q57]

4.6/5 - (5 votes)

[Jun-2022] Latest Salesforce OMS-435 exam dumps and online Test Engine

Salesforce OMS-435: Selling Salesforce Developer Products and Solutions

NEW QUESTION 34
A developer needs to configure a DataRaptor to retrieve data from a single object. The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?

DataRaptor Transform

DataRaptor Extract

DataRaptor Load

DataRaptor Turbo Extract

NEW QUESTION 35
A developer needs to transform contact data into a JSON array.

Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve the expected Output JSON? Choose 2 answers

Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.

Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.

Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.

Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)

NEW QUESTION 36
Which two of these options can a developer use to retrieve data from a Salesforce object?
Choose 2 answers

A DataRaptor Load Action

A DataRaptor Extract Action

A Lookup Input Element

A DataRapt or Post Action

NEW QUESTION 37
An OmniScript displays data from an API using Integration Procedure, but some of the data is missing.
Which two configuration errors could cause this? Choose 2 answers

The element name for the missing data does not match the JSON node key in the Integration Procedure Response.

The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.

The JSOW sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure

The missing data is trimmed in the Integration Procedure Action Response JSON Path.

NEW QUESTION 38
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?

Use a Datatable element

Set the class” collapsible” on the block element

Set the collapsible property on the block element

Use a conditional FlexCard State

NEW QUESTION 39
The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?

DataRaptor Extract Action

REST API Action

Navigation Action

SOQL Action

HTTP Action

NEW QUESTION 40
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

NEW QUESTION 41
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?

Show element if true

Disable read only if true

Set element to optional if false

Set element to require if true

NEW QUESTION 42
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.

How can the developer configure the FlexCard to display the case records in this way?

Enable the record Looping feature on the data table elements

Select the Repeatable Mode property on the data table elements

Enable the Repeat Records feature on the FlexCard Setup tab

Disable the Repeat Record feature on the FlexCard setup tab

NEW QUESTION 43
What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

NEW QUESTION 44
An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?

Use a Remote Action that calls the XMLStreamReader class

Use a Remote Action that calls the XMLStreamWriter class

Use a DataRaptor Transform to convert JSON to XML

Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.

NEW QUESTION 45
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community’s theme.
What must be developer do to configure the FlexCard for deployment in a Community?

Add the FlexCard’s API name to FlexCard Player component

Set the Target property in publish Options to Communitypage”

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ”Community”

NEW QUESTION 46
Refer to the exhibit.

What JSON code correct represent the step in the OmniScript Structure panel shown?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 47
A developer examines data received from an external data source. The data is nested two levels down in the JSON structure.
Which OmniStudio tool could the developer use to simplify this data?

A guided workflow

A DataRaptor Transform

An HTTP Action Element

An integration Procedure

NEW QUESTION 48
A developer writes an OmniScript that includes a DataRaptor that updates the Account statue based on information provided from the OmniScript. The information must be updated only if the Account record already exists. Otherwise, a new account must be created.
How should the developer accomplish this task?

Populate the Lookup object and Lookup fields

Check the Upset key and is required for Upsert checkboxes on the Account id field

Check the Upsert key checkbox on the Account Status field

Check Overwrite Target for all Null input checkbox on the Account id field

NEW QUESTION 49
Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

NEW QUESTION 50
A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?

x%SetValues.Date%

(‘ Setvalues’] [ ‘Date’]

%SetValues Date

{(SetValues. Date)}

NEW QUESTION 51
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat a. What error could cause this behavior?
Choose 2 answers

The fields that are not updated are read only in Salesforce.

In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.

The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.

ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor

NEW QUESTION 52
A developer needs to display read-only contact information in a OmniScript. The developer will format the information as a table, using merge codes to dynamically include first name, last name, street address, state, postal, code, and country from the data JSON.
Which OmniScript element should the developer use to meet this requirement?

Rich text Area

Text area

Text Block

Edit Block

NEW QUESTION 53
A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

NEW QUESTION 54
A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?

FetchCart

Response

ResponseCartDebug

ResponseCart

NEW QUESTION 55
A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?

As an OS Action

As a Custom Action

As an OmniStudio Action

As a Lightning Action

NEW QUESTION 56
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

Both parent and embedded OmniScripts have the same element name for the Set values element.

A developer failed to include a Navigation Element to pass data from the parent OmniScript.

The LWC PubSub Message flag in the Set Values action of the parent has not been set.

The flag passDataJSON in the parent OmniScript in not configured correctly.

NEW QUESTION 57
A developer need to configure a calculation procedure to calculation a subtotal using two different depending on whether the input Boolean variable is Customer is set to true or false.
How should a developer configure the calculation procedure to conditionally execute the correct formula?

Use two separate Calculation Steps with the Conditional Step property selected: use the ISTRUE(isCustomer) and NOT (ISTRUE) (isCustomer) functions in the Condition syntax.

Use two separate Calculation Steps with the Conditional Step property selected: reference just the isCustomer variable in the Conditional syntax (no comparison necessary)

Use two separate Calculation Steps with the Conditional Step property selected: compare the isCustomer variable directly to the literal true and false values in the Condition syntax.

Use a single Calculation Steps with IF statement directly in the formula definition to reference the isCustome variable and conditionally perform the appropriate calculation.

Salesforce OMS-435 Exam Syllabus Topics:

Topic	Details
Topic 1	Configure Fields to Display Data and Configure Actions to Launch OmniScripts from FlexCards Configure OmniScript Elements such as Type Ahead Blocks
Topic 2	Integration Procedures and OmniStudio Data Tools Explore OmniStudio Tools and Resources
Topic 3	Configure Element Properties such as Branching Conditions Learn the Benefits and Features of OmniStudio LWC and Component Types
Topic 4	Build Integration Procedures and DataRaptors for OmniScripts and FlexCards Assign Data Sources to FlexCards, Including External Data Sources
Topic 5	Use a DataRaptor to Transform FlexCard Data JSONs Design and Build Parent and Child FlexCards
Topic 6	Learn How Data Flows Between OmniScripts and Integration Procedures Configure Conditions to Display Different Flexcard States
Topic 7	Test and Troubleshoot Components in the OmniStudio Interaction Console Configure FlexCard Flyouts to Display Additional Data