Latest Cisco 500-920 Free Certification Exam Material with 42 Q&As [Q24-Q44]

Rate this post

Latest Cisco 500-920 Free Certification Exam Material with 42 Q&As

UPDATED 500-920 Exam Questions Certification Test Engine to PDF

Cisco 500-920 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshoot storage area networks, including Fibre Channel, FCoE, zoning, NPV, and NPIV
Topic 2	Troubleshoot FEX
Topic 3	Troubleshoot data center unified computing
Topic 4	Troubleshoot virtualization solutions

NO.24 When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?

Enable Quiet Boot on the Server’s BIOS

Restart the Server

Disable Fast Boot on the Server’s BIOS

Enable Quiet Boot on the Server’s Service Profile

Disable Fast Boot on the Server’s Service Profile

NO.25 When configuring UCS SAN Connectivity to a 3rd Party FibreChannel Storage Array that is connecting directly to the UCS Fabric Interconnects, which option is Cisco recommended’?

Connect the Storage Array to a RC Storage Port and Enable NPV Mode on the UCS Fabric Interconnects

Connect the Storage Array to an Appliance Port and Enable NPV Mode on the UCS Fabric Interconnects

Direct connectivity between UCS Fabric Interconnects and FibreChannel Storage Arrays is not supported

Connect the Storage Array to a FC Storage Port and Enable Switching Mode on the UCS Fabric Interconnects

Connect the Storage Array to an Appliance Port and Enable Switching Mode on the UCS Fabric Interconnects

NO.26 Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?

The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch

The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects

The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

NO.27 An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?

The newest entry in the SEL will be overwritten by the overvoltage condition event.

The oldest entry in the SEL will be overwritten by the overvoltage condition event

The SEL is not used to record server related events, such as overvoltage conditions.

The overvoltage condition event will not be recorded in the SEL.

NO.28 The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2 What is the location of the blade that has veth 705 associated to it?

Chassis 3, Slot 1

Chassis 3. Slot 2

There is not enough information

Chassis 1. Slot 2

NO.29 After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )

XML API Access

Web Access

In-band Access

SNMP

Out-of-Band Access

NO.30 Which two formats can be configured for Cisco’s Call Home email message? (Choose two )

JSON

CSV

Full text

XML

Call Home Message Formats The Call Home feature offers the following message formats: * Short Text – Suitable for pagers or printed reports. * Plain Text – Full formatted message information suitable for human reading. * XML – Matching readable format using Extensible Markup Language (XML) and Adaptive Markup Language (AML) document type definitions (DTDs). The XML format enables communication with the Cisco TAC. For user-defined destination profiles, the format options are long-text, short-text, or XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed.
Reference:
http://www.audentia-gestion.fr/cisco/smart-call-home-feature-guide-1611.pdf

NO.31 You are in the process of upgrading your UCS M3 Server to a newer UCS M4 Server. You associate the Service Profile to the new UCS Server, but it fails to boot You suspect of a failed boot hard drive. You check your RAID1 Boot LUN in UCS Manager, but see no error messages What could be causing the issue?

The newer Cisco UCS M4 Server is using flash drives, not hard drives

The newer Cisco UCS M4 Server is using disks of larger capacity than the previous UCS M3 Server

A misconfiguration on the Service Profile Local Boot Policy

A misconfiguration on the Service Profile Local Disk Policy

NO.32 What occurs that causes a Split Brain Issue with Fabric Interconnects?

The subordinate Fabric Interconnect detects heartbeat failure and declares itself primary

Manage configuration changes made with UCS Manager

A quorum tie occurs that must be resolved by the SEEPROM

Both cluster links fail

NO.33 Which two interfaces allow access to Cisco UCS Manager? (Choose two )

Cisco KVM

Cisco UCS Manager XML API

Cisco IMC

Cisco UCS Manager GUI

NO.34 In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?

Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool

Create an IPMI Policy

Create a Service Profile

Create different VLANs, with different VLAN IDs

Create a Management IP Pool, a VLAN. and a VLAN Group

NO.35 What is the likely cause of an intermittent SAN Boot fails?

Misconfigured SAN boot target in the boot policy of the service profile

LUN ID Mismatch

FCoE used instead of FC

Wrong boot order in the service profile

NO.36 When troubleshooting a LAN connectivity issue, you notice a failed uplink from the Cisco UCS Fabric Interconnects to the upstream LAN switch. What two could be causing the issue? (Choose two )

Misconfigured VLAN on the failed uplink

Misconfigured QoS parameters on the failed uplink

A port channel mismatch between the Fabric Interconnects and the upstream LAN switch

A SFP Type mismatch between the Fabric Interconnects and the upstream LAN switch

A port speed configuration mismatch between the Fabric Interconnects and the upstream LAN switch

NO.37 What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?
Check the HCL

No Drivers are needed in a UCS environment

Apply the device driver update to the devices

No need to do anything Drivers are automatically installed for you

Test device driver compatibility

NO.38 After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )

VIC Cards and Fiber Channel HBAs

Cisco Fabric Interconnects

Cisco UCS Manager

RAID Controllers

NO.39 When server is booting from SAN, which command verifies the PLOGI sessions with the target?

Lunmap

Lunlist