Verified NS0-527 dumps Q&As – 2022 Latest NS0-527 Download [Q62-Q85]

NO.62 Click the Exhibit button.

You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of hourly maximum Snapshot copies to retain only four copies.
Which additional action is needed to keep only four hourly Snapshot copies in this volume after modifying the schedule?

NO.63 Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.
In this scenario, what must the customer do tocreate the SnapMirror relationship?

NO.64 You are asked to provide a solution that will allow a client to copy the data stored in a FlexVol volume to a remote tape system for archiving. You are using a cluster-aware backup application to perform this task.
Which three actions are required when you configure this solution for your client? (Choose three.)

NO.65 A customer is running multiple Oracle DBs over NFS. The volumes are replicated using
SnapMirror to a secondary site, which also hosts the development and test systems. They want to streamline the creation of test environments on the secondary site so that they will not have to manually use FlexClone to clone multiple volumes for each request.
In this scenario, which tool satisfies these requirements?

NO.66 You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?

NO.67 Click the Exhibit button.

You have been receiving the lag status error notifications shown in the exhibit.
What must you do to correctthis problem?

NO.68 You have deployed a 4-node fabric MetroCluster configuration for cross-site disaster-recovery protection. In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation?
(Choose two.)

NO.69 After manually implementing aSnapVault relationship between two volumes on two separate clusters, the primary Snapshot copies are working fine. The baseline has been transferred successfully. The relationship is shown as healthy and idle.
However, the updates are not taking place as scheduled on the secondary system.
What is causing the problem?

NO.70 You are configuring a SnapMirror replication between a source volume with adaptive compression enabled and a destination volume with secondary compression enabled.
In this scenario; which statement is correct?

NO.71 You have a SnapMirror relationship established between two sites and want to verify that the data on the DR site is usable without disturbing the source.
In this scenario, which three steps are required to accomplish this task? (Choose three.)

NO.72 You have recently installed and set up a new NetApp HCI deployment in your data center that consists of four compute nodes and four storage nodes. Inside this HCI deployment, you are using ONTAP Select for file services. You must protect the data inside the ONTAP Select VM in case of a rack failure.
Which two methods would accomplish this task? (Choose two.)

NO.73 A company wants to implement a hybrid cloud backup model for their file services. They want to configure an incremental forever backup that can then push to a public or private cloud.
Which products satisfy this requirement?

NO.74 A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum. In this scenario, how much burst time do they need to purchase?

NO.75 You are using Veeam Backup & Replication to create Snapshot-based backups of your VMware environment running ONTAP. You added your primary and secondary ONTAP cluster to the Veeam Storage inventory.
However, you are unable to select your secondary ONTAP cluster as a secondary target for your Veeam backup job.
In ONTAP System Manager, which action solves this problem?

NO.76 You have set up a SnapMirror relationship between two SVMs for data protection. The data in the source volume is unavailable due to an event related to a virus infection leading to data corruption.
In this scenario, which three actions are required to activate the SnapMirror destination volume and provide data access to the users? (Choose three.)

NO.77 Which attribute does Data ONTAP use the identify Snapshot copies between primary and secondary FlexVol volumes in a SnapVault relationship?

NO.78 Your customer wants to implement SVM DR, but the customer is not certain whether the identity-preserve parameter should be enabled. The customer explains that the source and destination clusters are in different network subnets.
In this scenario, which SVM DR solution should the customer use?

NO.79 Click the Exhibit button.

A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m. They have a network connection between two sites that provides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.
Referring to the exhibit, how long does the SnapMirror update take to finish?

NO.80 Click the Exhibit button.

Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer’s stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?

NO.81 Data on an AFF system is replicated using SnapMirror to a FAS system that is configured
with NL-SAS-based storage.
In this scenario, which storage efficiency is lost on the SnapMirror destination?

NO.82 A company just installed SnapCenter to help manage their ONTAP 9.7 environment. The database administrator wants to add new volumes withLUNs for a 10 TB Oracle database.
Which two tools would accomplish this task? (Choose two.)

NO.83 You have a SolidFire cluster running SolidFire Element Operating System 10.1 and are asked to replicate to an existing ONTAP cluster.
Which ONTAP destination issupported?

NO.84 You are the administrator of an ONTAP 9.7 cluster. You configured an hourly Snapshot schedule for all volumes. One of your users accidentally deleted an important spreadsheet file on an SMB share. This file must be restored within a minimum amount of time.
Which two actions satisfy this requirement? (Choose two.)

NO.85 You want to implement NetApp Volume Encryption on your ONTAP 9.3 cluster production volumes.
What are two ways to accomplish this task? (Choose two.)