5V0-41.20 Questions Prepare with Learning Information! 2022 Regularly updated [Q21-Q44]

5/5 - (1 vote)

5V0-41.20 Questions Prepare with Learning Information! 2022 Regularly updated

Get 5V0-41.20 Products Practice Material for 5V0-41.20 Exam Question Preparation

The benefit of obtaining the VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam Certification

This certification will judge your skills and knowledge on your understanding of Application Development security concepts & understanding of the need to secure an Application Development, what objects can be secured, what objects ought to be secured, user accounts, roles.
This certification credential will give you edge over other counterparts. Apart from knowledge of 5V0-41.20: VMware vSAN 6.7 Specialist Exam.
It help you to make your career into Application Development Administration and Application Development Administrator used to get respectful plus highly paid jobs into Market. Statistics on the VmWare Certification website indicate that 91% of hiring managers consider certification as part of their hiring criteria. The main benefit of earning a VmWare Certification is that it shows potential employers/hiring managers that you have the necessary requirements and skills to be the perfect candidate for the job.

Who should take the VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam

The 5V0-41.20: VMware vSAN 6.7 Specialist Exam certification is an internationally recognized certification that provides validation for professionals interested in advancing their careers in the VmWare Dynamics 365 domain.

VMware vSAN 6.7 Specialist exam assesses that the candidate possesses the fundamental knowledge and proven skills in the area of VmWare vSAN 6.7 Specialist .

if a candidate/professional seeks a powerful improvement in career growth, he needs enhanced knowledge, skills, and talents. The 5V0-41.20: VMware vSAN 6.7 Specialist certification provides proof of this advanced knowledge and skill such as utilizing TRIM and UNMAP from vSAN guest perspective, performance information in UI, vSAN health monitoring.

How to Prepare For VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam

Preparation Guide for VMware 5V0-41.20: VMware SD-WAN Troubleshoot Exam

Introduction

The VMware vSAN 6.7 Specialist exam is for professionals with 6-12 months of hands-on experience configuring, handling, and developing vSphere and vSAN. There are no clear prerequisites for the VMware 5V0-41.20 Course, although you should be acquainted with the principles and technology relevant to virtual machine implementation and administration. You are in control of critical Application developments that cover various platforms and ecosystems as an HTML5 VMware 5V0-41.20 administrator. You work together as a team and excel in a fast-paced world. You manage the application life cycle, build the user interface with HTML5, format it with CSS, and code it with JavaScript.

This exam assesses the knowledge of Core Application Development Concepts, Creating Application Development Objects, and Managing an Application Development Environment. Certification verifies your abilities and experience in the fields in which you prefer to serve. These certifications are available from a variety of suppliers on the market. If an applicant wishes to operate on 5V0-41.20: VMware vSAN 6.7 Specialist and demonstrate his skills, VmWare offers a certification. This VMware vSAN 6.7 Specialist Individuals Qualification 5V0-41.20 A candidate’s skills in 5V0-41.20 exam test Technology can be validated by certification.

In this guide, we will cover the 5V0-41.20 exam dumps, and all aspects of the 5V0-41.20 practice exams.

NEW QUESTION 21
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?

Cloud VPN for the Edges / Profiles is not enabled.

There is an invalid MTU configuration at Chicago.

OSPF or BGP is not enabled.

The routing table on the Edges has not been initialized.

NEW QUESTION 22
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100%.
Where should the administrator verify this information?

In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status

In the VCO > Monitor > Click London_Site01 > Click the System Tab

In the VCO > Remote Troubleshooting > Remote Actions > System Status

In the VCO > Monitor > Alerts

NEW QUESTION 23
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY’s hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?

The Dynamic Branch to Branch has not been enabled.

The hub is not configured with the proper IP address.

Dynamic Branch to Branch using gateways has not been enabled.

The Edge’s profile does not include Backhaul hubs as an option.

NEW QUESTION 24
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?

Jitter Packet Loss, Speed.

Jitter, Packet Loss, Latency.

Jitter, Speed, Latency.

Packet Loss, Latency, Speed.

NEW QUESTION 25
Scenario 1:
A network administrator is tasked with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
After the network administrator has determined the problem with the Edge not being able to access the Internet, the administrator receives another error stating that the SD-WAN Orchestrator is still not reachable.
The VCO’s address is Amer-vcoOl.velocloud.net.
Refer to the Exhibit(s).

What might be disallowing the Edge to communicate with the Orchestrator?

The SD-WAN Orchestrator specified is incorrect, and a new activation email needs to be sent.

The local firewall that the Edge uses to reach externally is blocking UDP Port 53 in both directions.

The SD-WAN Orchestrator has a limited 60-second window for the Edge to come online.

The SD-WAN Orchestrator is not being resolved for DNS.

NEW QUESTION 26
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)

Determine if the DH parameter on the Edge has been configured.

Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.

Determine if the NVS has been enabled and assigned to a profile.

Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.

NEW QUESTION 27
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?

Jitter Packet Loss, Speed.

Jitter, Packet Loss, Latency.

Jitter, Speed, Latency.

Packet Loss, Latency, Speed.

NEW QUESTION 28
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?

The other Edge location is advertising a secure route for the application’s subnet.

uI has been configured forcing traffic into the underlay towards the hub.

Configuring Business Policy Direct settings have no affect on traffic flows.

Internet Backha.

The underlay path is not available forcing traffic into the overlay.

NEW QUESTION 29
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A business policy is created and saved.
How can the network administrator verify the business policy is working?

Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.

Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.

Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.

Check under the Monitor > Business Priority tab for Business policy statistics.

NEW QUESTION 30
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

The tunnel from spoke to hub is not coming up. What are the two possible reasons? (Choose two.)

Spoke Edge and hub Edge are two different Edge models.

Spoke Edge and hub Edge have a mismatch certificate authentication mode.

Hub WAN Interface might be behind the NAT Device or firewall.

Dynamic Branch to Branch is not enabled.

NEW QUESTION 31
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).

What is the cause of this issue?

The activation link did not specify the updated image location requiring the Edge to be re-activated.

The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.

The Edge will be offline for about 4 hours until it has completed the factory image installation.

The activation link contained incorrect configurations for WAN overlays and WAN interfaces.

NEW QUESTION 32
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications.
How should the technician verify if the ports on the Edge are up and working?

Look under Administration and System Settings to verify if the interfaces are configured and enabled.

Look in Test & Troubleshoot under the Remote Diagnostics and run Interface status.

Look in Test & Troubleshoot under the Remote Actions and run System Health.

Look in Test & Troubleshoot under the Remote Diagnostics and run System Health.

NEW QUESTION 33
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?

Cloud VPN for the Edges / Profiles is not enabled.

There is an invalid MTU configuration at Chicago.

OSPF or BGP is not enabled.

The routing table on the Edges has not been initialized.

NEW QUESTION 34
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY Hub location. While attempting to deploy the VNF, the process keeps failing.
Where can the administrator check to see more detail?

VCO > Monitor > Logging

VCO > Monitor > Events

VCO > Test & Troubleshoot > Remote Diagnostics > Events

VCO > Test & Troubleshoot > Remote Actions > Alerts

NEW QUESTION 35
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A business policy is created and saved.
How can the network administrator verify the business policy is working?

Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.

Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.

Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.

Check under the Monitor > Business Priority tab for Business policy statistics.

NEW QUESTION 36
Scenario:1
A network administrator is tasked with enabling SD-WAN at three branch locations, A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center in this environment as well. Please refer to the topology.
Exhibit.

One of the Edges at the Chicago site is unable to activate. The Edge has a red LED. What is the next troubleshooting step?

If the Edge is connected to its HA peer, determine if there is a link-light on the HA peer-link.

If the Edge is connected to the MPLS circuit, determine if the Hub is advertising gateway routes.

If the Edge is connected to the MPLS circuit which does not have DHCP, determine if there is a static IP configuration that needs to be applied upon activation.

If the Edge is connected to its HA peer, determine if underlay BGP peering is present between the two Edges.

NEW QUESTION 37
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY’s hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?

The Dynamic Branch to Branch has not been enabled.

The hub is not configured with the proper IP address.

Dynamic Branch to Branch using gateways has not been enabled.

The Edge’s profile does not include Backhaul hubs as an option.

NEW QUESTION 38
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?

The administrator failed to specify the Edge Type as a VeloCloud Cluster.

This is an expected behavior.

The device is faulty and will need a replacement.

The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.

NEW QUESTION 39
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?

The profiles are not configured to allow dynamic branch to branch VPNs.

The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.

None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.

Neither profile has been configured to utilize cloud gateways.

NEW QUESTION 40
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.
How can this be prevented?

Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.

Segmentation is currently not supported on VeloCloud Edge.

Create two subnets, one for Guest wireless traffic and another one for Production traffic.

Have Guest wireless and Production traffic in the same segment but different VLANs.

NEW QUESTION 41
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.
What could be the possible reason?

The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.

On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.

The licensing does not support multiple overlays on a single physical interface.

Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.

NEW QUESTION 42
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.
Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)

Check the underlay network (bandwidth, latency, jitter, packet loss)

Change the bandwidth measurement under WAN Overlay Advanced Settings

Check the flows to verify which Business Policy the traffic of interest is matching

Look under Monitor, check Business priority tab

NEW QUESTION 43
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago’s interfaces. The network administrator’s VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)

Set the uplink community to forward traffic to a group of neighbors.

Direct all traffic to that neighbor designated as an uplink,

Stop mutual redistribution of routes from underlay and overlay.

Prevent the site in question from becoming a transit site.

NEW QUESTION 44
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?