Updated Oct 09, 2022 Verified Pass C_TS422_1909 Exam in First Attempt Guaranteed [Q50-Q70]

4.5/5 - (2 votes)

Updated Oct 09, 2022 Verified Pass C_TS422_1909 Exam in First Attempt Guaranteed

Free C_TS422_1909 Sample Questions and 100% Cover Real Exam Questions (Updated 91 Questions)

QUESTION 50
What are some uses for the low-level code assigned to each material? Note: There are 2 correct answers to this question.

It is used in MRP to determine the sequence in which materials are planned.

It is used by engineering to identify sub items in an engineering bill of material(BOM).

It is used by product costing to determine how costs are rolled up.

It is used by ATP to determine the priority of alternative components.

QUESTION 51
Where does the system check master data selection settings during the creation of planned orders and production orders? Note: There are 3 correct answers to this question.

In the production version

In the production order type

In the routing

In the bill of materials (BOM)

In the MRP controller

QUESTION 52
The setup time on the production line to produce a material is extensive. You would like to avoid multiple setups and limit the production of the material based on a planning calendar.
Which type of lot size procedure should you use to accomplish this?
Please choose the correct answer.
Response:

Exact lot sizing

Periodic lot sizing

Minimum lot sizing

Fixed lot sizing

QUESTION 53
For what production type are production orders used?

Period and quantity-oriented production

Replenishment controlled by control cycles

Process manufacturing processes

Discrete manufacturing processes

QUESTION 54
When do you use variant bills of materials (BOMB)?

When multiple material is have similar BOMB

When a material has multiple BOMB

When multiple material also have the same BOM

When a material has a configurable BOM

QUESTION 55
Which actions does the system perform by default when you save a confirmation for a finished product in repetitive manufacturing? Note: There are 3 correct answers to this question.

Archiving of documents for assembly scrap

Posting of production costs to the production cost collector

Reduction of associated capacity requirements

Material staging for next order in sequence

Posting of goods receipt for the product

QUESTION 56
Which warehouse management functions are available in SAP EWM but NOT in SAP WM?
There are 3 correct answers to this question.
Response:

Slotting

Labor Management

Expected goods receipt

Handling Unit Management

Yard Management

QUESTION 57
At the end of the MRP run you receive the exception message “Reschedule In Operation”. What caused the message to be generated?
Please choose the correct answer.
Response:

A firmed planned receipt cannot be rescheduled

The requirements date occurs that of a firmed planned receipt

The requirement no longer exists

The requirements date occurs before that of a firmed planned receipt

QUESTION 58
What is the difference between co-products and by-products?

Only co-products can be manufactured in isolation from the main product.

Only by-products have a zero inventory valuation.

Only co-products are identified by a special item category in the bill of material (BOM).

Only co-products appear in the process or production order settlement rule.

QUESTION 59
You have maintained the parameters for simple discontinuation the material master of a component. Which business process will be affected if the available stock is zero and the discontinuation date is in the past?

Back flushing

Material requirements planning

Production order release

Kanban

QUESTION 60
You want to insert an operation at a certain time on a work center. The planning direction is forward. The desired dispatching time coincides with an operation that has previously been dispatched. How does the insertion take place?

The new operation is inserted at the desired time; the previously dispatched operation is moved forward.

The new operation is inserted at the desired time the previously dispatched operation is moved backward.

The previously dispatched operation stays as is the new operation is inserted after the dispatched operation.

The previously dispatched operation stays assist the new operation is inserted before the dispatched operation.

QUESTION 61
Mode selection is one of the scheduling options available in Advanced Planning in SAP S/4HANA. When can you use mode selection?

When multiple planned orders exists in one resource

When alternate resources are used within one operation

When multiple production versions are maintained for one product

When multiple operations are maintained for one product

QUESTION 62
Which of the following objects can you release so that the business transactions for process order execution and process management can be executed?
There are 2 correct answers to this question.
Response:

Individual operations

Individual process instructions

Individual phases

Individual control recipes

QUESTION 63
Where can you maintain consumption mode and consumption periods for planning strategies?
There are 2 correct answers to this question.
Response:

In the requirements class

In the plant parameters

In the MRP group

In the material master

QUESTION 64
What are drawbacks of the separation of OLTP and OLAP?
There are 4 correct answers to this question.
Response:

Only the OLAP system has the latest data

The OLAP system needs to write back the data to the OLTP system

Multiple copies of the data exist

Batch process are required to keep OLTP and OLAP in sync

Only the OLAP system has a predefined subset of the data

QUESTION 65
How can you achieve a feasible production plan in case of capacity constraints? Note: There are 3 correct answers to this question.

Reduce the planning window.

Adjust the available capacity.

Execute a new production planning run.

Select an alternative mode on a resource.

Form optimum sequences to reduce setup times.

QUESTION 66
Which capabilities does the Alert monitor have?
There are 3 correct answers to this question.
Response:

Automatically predict alerts in future planning cycles

Automatically send alerts with Alert Notification Engine

Nominate time-dependent substitutes for a planner

Automatically reschedule in case of overload alerts

Generate alerts based on defined threshold values

QUESTION 67
You want to triggering-house production of a semi-finished mater al before a sales order for the corresponding finished good is received. Which planning strategy supports the consumption of planned independent requirements for the semi-finished material?

Make-to-order production (20)

Planning without final assembly (50)

Planning with final assembly (40)

Planning at assembly level (70)

QUESTION 68
What Kanban status automatically posts goods receipt with reference to the procurement element?
Please choose the correct answer.
Response:

Full

Empty

In use

Wait

QUESTION 69
An issue storage location was NOT found through the work center, bill of material (BOM)item, or material master. What determines whether the storage location can be derived from the production version?

Plant Data

MRP Profile

MRP Group

MRP Controller

QUESTION 70
Which process order function uses a resource network?
Please choose the correct answer.
Response:

Capacity planning

Resource selection

Resource scheduling

Capacity leveling

Loading …