Guaranteed High Marks with Updated & Real 2V0-41.20 Dumps pdf Free Updates [Q35-Q55]

Guaranteed High Marks with Updated & Real 2V0-41.20 Dumps pdf Free Updates

PASS RATE VCP-NV 2V0-41.20 Certified Exam DUMP

QUESTION 35
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.
Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?

 e1000

 VMXNET2

 VMXNET3

 Flexible

QUESTION 36
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

 get support-bundle file vcpnv.tgz

 set support-bundle file vcpnv.tgz

 vm-support

 esxcli system syslog config logger set –id=nsxmanager

QUESTION 37
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)

 5685

 1235

 5671

 5678

 1234
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual

QUESTION 38
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?

 Manually create a gateway interface and mark it as transit.

 Automatically created when DR is created.

 Automatically created when SR is initialized.

 Manually create external uplink interface and mark it as transit.
Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/

QUESTION 39
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?

 Create a secondary vNIC on each quest VM for SVM communication.

 Place a partner SVM on each compute cluster node.

 Centralize partner SVMs in a service cluster.

 Add partner SVMs to an edge cluster.

QUESTION 40
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

 SYSTEM

 FABRIC

 GROUPING

 MONITORING

Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

QUESTION 41
Which profile must be attached to the ESXi cluster to prepare the host for NSX-T Data Center?

 Transport Node Profile

 Uplink Profile

 Switching Profile

 Host Profile

Explanation/Reference:

QUESTION 42
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?

 SR and DR doesn’t need to be connected to provide any stateful services.

 DR is instantiated and automatically connected with SR.

 SR is instantiated and automatically connected with DR.

 SR and DR is instantiated but requires manual connection.

QUESTION 43
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

 Multicast routing is implemented with PIM Sparse-Mode.

 IGMP Snooping is used to populate multicast forwarding tables.

 Tier-0 gateways can be the Rendezvous Point.

 Multicast is supported in ESXi and KVM transport nodes.

 An Edge can be the Rendezvous Point.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

QUESTION 44
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?

 openvswitch

 etherswitch

 nsx-vswitch

 dyswitch

QUESTION 45
Which tool could be used to configure BGP on a Tier-0 Gateway?

 PowerShell

 API

 ESX CLI

 NSX CLI

QUESTION 46
Which CLI command shows syslog on NSX Manager?

 show log manager follow

 get log-file auth.log

 get log-file syslog

 /var/log/sysloq/syslog.log

Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html

QUESTION 47
Where are Distributed Firewall logs containing access decisions stored?

 NSX API

 NSX Edge

 NSX Manager

 Hypervisor transport node

Reference:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html

QUESTION 48
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)

 Port NAT

 Source NAT

 Destination NAT

 1:1 NAT

 Reflexive NAT

QUESTION 49
Which CLI command shows syslog on NSX Manager?

 show log manager follow

 get log-file auth.log

 get log-file syslog

 /var/log/sysloq/syslog.log

QUESTION 50
Which is correct when deploying a NSX Edge in a KVM only environment?

 deploy NSX Edge VM with QCOW2 image

 deploy NSX Edge VM with ISO image

 deploy NSX Edge on a bare-metal server

 deploy NSX Edge VM with OVF template

QUESTION 51
What are two supported N-VDS modes? (Choose two.)

 DPDK Datapath

 Overlay Datapath

 Secure Datapath

 Enhanced Datapath

 Standard Datapath

Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D

QUESTION 52
Which three services are compatible with VRF Lite? (Choose three.)

 VPN

 Intrusion Detection

 NAT

 Load Balancer

 DHCP

Explanation
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.

QUESTION 53
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?

 join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>

 join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint>

 join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint
<nsx-manager-thumbprint>

 join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint
<nsx-manager-thumbprint>

QUESTION 54
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

 Segment Port

 Group

 Segment

 DFW

 Tier-1 Gateway

QUESTION 55
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

 esxcli network diag ping -H <destination IP address>

 vmkping ++netstack=geneve -d -s 1572 <destination IP address>

 vmkping ++netstack=vxlan-d -s 1572 <destination IP address>

 esxcli network diag ping -I vmk0 -H <destination IP address>
https://kb.vmware.com/s/article/1003728

 Loading …

VMware 2V0-41.20 Exam Syllabus Topics:

Topics of Professional VMware NSX-T Data Center 2V0-41.20 Exam

Candidates should recognise each of the following aims prior to taking this exam. Each objective is described below; the applicant should have experience with and associated documentation along with relevant resources. That includes data relevant to the target. All applicable product information should be familiar to the applicant or have an equivalent skill set.

It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Professional VMware NSX-T Data Center 2V0-41.20 examination is listed below in detail of each section and their topics:

1. Architectures and Technologies

There are no testable objectives covered by this section.

2. VMware Products and Solutions

Objectives covered by this section:

• Describe the VMware Virtual Cloud Network Vision
• Define NSX-T Data Center Terminology
• Differentiate the Functionalities of MP, CCP, DP and Consumption Planes
• Identify Physical and Virtual Infrastructure Requirements for NSX-T Data Center
• Describe NSX-T Data Center Architecture and Component Sub-systems
• Explain the NSX-T Data Center Security Architecture and Features
• List the Use-cases for NSX-T Data Center
• Explain the Value Proposition and Features of NSX
• Outline the Solutions of NSX Portfolio
• Identify the Supported Integration Platforms of NSX-T Data Center (Containers, Public Cloud, Private Cloud, Hybrid Cloud, DevOps tools, 3rd Party etc.)
• Describe the Logical Switching Architecture and Features
• Describe the Logical Routing Architecture and Features

3. Planning and Designing

There are no testable objectives covered by this section.

4. Installing, Configuring, and Setup

Objectives covered by this section:

• Configure NSX-T Data Center Network Services (Layer-3)
• Configure NSX-T Data Center Security Features
• Configure Service Insertion with NSX-T Data Center
• Configure and Manage Logical Switching Features
• Outline the installation and Preparation Workflow of NSX-T Data Center

5. Performance-tuning, Optimization, Upgrades

There are no testable objectives covered by this section.

6. Troubleshooting and Repairing

Objectives covered by this section:

• Troubleshoot Common NSX-T Data Center Component Issues
• Troubleshoot Common Connectivity Issues
• Troubleshoot Common NSX-T Data Center Installation/Configuration Issues
• Compare and Contrast Tools Available for Troubleshooting

7. Administrative and Operational Tasks

Objectives covered by this section:

• Configure Roles and Permissions for NSX-T Data Center Environment
• List Operations Tasks in a VMware NSX-T Data Center Environment (syslog, backup/restore etc.)
• Generate Log Bundles
• Monitor a VMware NSX-T Data Center Implementation

Best 2V0-41.20 Exam Preparation Material with New Dumps Questions: https://www.braindumpstudy.com/2V0-41.20_braindumps.html

         

Related Links: www.stes.tyc.edu.tw www.stes.tyc.edu.tw telegra.ph www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw