Check Real Cisco 350-701 Exam Question for Free (2023) [Q58-Q73]

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/s1/sec-s1-xe-3se-3850-cr-book/sec-s1-xe-3se-3850-cr-book_chapter_01.html#wp3404908137 Displaying the Summary of All Auth Manager Sessions on the Switch Enter the following:
Switch# show authentication sessions
Interface MAC Address Method Domain Status Session ID
Gi1/48 0015.63b0.f676 dot1x DATA Authz Success 0A3462B1000000102983C05C Gi1/5 000f.23c4.a401 mab DATA Authz Success 0A3462B10000000D24F80B58 Gi1/5 0014.bf5d.d26d dot1x DATA Authz Success 0A3462B10000000E29811B94

How To Troubleshoot ISE Failed Authentications & Authorizations
Check the ISE Live Logs
Login to the primary ISE Policy Administration Node (PAN).
Go to Operations > RADIUS > Live Logs
(Optional) If the event is not present in the RADIUS Live Logs, go to Operations > Reports > Reports > Endpoints and Users > RADIUS Authentications Check for Any Failed Authentication Attempts in the Log

The syntax of this command is: flow-export destination interface-name ipv4-address | hostname udp-port This command is used on Cisco ASA to configure Network Secure Event Logging (NSEL) collector to which NetFlow packets are sent. The destination keyword indicates that a NSEL collector is being configured. + The interface-name argument is the name of the ASA and ASA Services Module interface through which the collector is reached. + The ipv4-address argument is the IP address of the machine running the collector application. + The hostname argument is the destination IP address or name of the collector. + The udp-port argument is the UDP port number to which NetFlow packets are sent. You can configure a maximum of five collectors. After a collector is configured, template records are automatically sent to all configured NSEL collectors. Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/ monitor_nsel.html This command is used on Cisco ASA to configure Network Secure Event Logging (NSEL) collector to which NetFlow packets are sent. The destination keyword indicates that a NSEL collector is being configured.
+ The interface-name argument is the name of the ASA and ASA Services Module interface through which the collector is reached.
+ The ipv4-address argument is the IP address of the machine running the collector application.
+ The hostname argument is the destination IP address or name of the collector.
+ The udp-port argument is the UDP port number to which NetFlow packets are sent.
You can configure a maximum of five collectors. After a collector is configured, template records are automatically sent to all configured NSEL collectors.
Reference:
The syntax of this command is: flow-export destination interface-name ipv4-address | hostname udp-port This command is used on Cisco ASA to configure Network Secure Event Logging (NSEL) collector to which NetFlow packets are sent. The destination keyword indicates that a NSEL collector is being configured. + The interface-name argument is the name of the ASA and ASA Services Module interface through which the collector is reached. + The ipv4-address argument is the IP address of the machine running the collector application. + The hostname argument is the destination IP address or name of the collector. + The udp-port argument is the UDP port number to which NetFlow packets are sent. You can configure a maximum of five collectors. After a collector is configured, template records are automatically sent to all configured NSEL collectors. Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/ monitor_nsel.html

Depending on your company policy, you might be able to use your mobile phones, tablets, printers, Internet radios, and other network devices on your company’s network. You can use the My Devices portal to register and manage these devices on your company’s network.
Depending on your company policy, you might be able to use your mobile phones, tablets, printers, Internet radios, and other network devices on your company’s network. You can use the My Devices portal to register and manage these devices on your company’s network.
Depending on your company policy, you might be able to use your mobile phones, tablets, printers, Internet radios, and other network devices on your company’s network. You can use the My Devices portal to register and manage these devices on your company’s network.

Explanation

Explanation/Reference:

Explanation
+ Cisco Cloudlock continuously monitors cloud environments with a cloud Data Loss Prevention (DLP) engine to identify sensitive information stored in cloud environments in violation of policy.
+ Cloudlock is API-based.
+ Incidents are a key resource in the Cisco Cloudlock application. They are triggered by the Cloudlock policy engine when a policy detection criteria result in a match in an object (document, field, folder, post, or file).
Reference:
Note:
+ Security information and event management (SIEM) platforms collect log and event data from security systems, networks and computers, and turn it into actionable security insights.
+ An incident is a record of the triggering of an alerting policy. Cloud Monitoring opens an incident when a condition of an alerting policy has been met.

Each rule also has an action, which determines whether you monitor, trust, block, or allow matching traffic.
Note: With action “trust”, Firepower does not do any more inspection on the traffic. There will be no intrusion protection and also no file-policy on this traffic.

The logging of your identities’ activities is set per-policy when you first create a policy. By default, logging is on and set to log all requests an identity makes to reach destinations. At any time after you create a policy, you can change what level of identity activity Umbrella logs.
From the Policy wizard, log settings are:
Log All Requests-For full logging, whether for content, security or otherwise Log Only Security Events-For security logging only, which gives your users more privacy-a good setting for people with the roaming client installed on personal devices Don’t Log Any Requests-Disables all logging. If you select this option, most reporting for identities with this policy will not be helpful as nothing is logged to report on.

Explanation
https://www.cisco.com/c/en/us/products/security/what-is-a-ddos-attack.html#~types-of-ddos-attacks