Juniper JN0-636 Certification Exam Dumps with 140 Practice Test Questions [Q20-Q37]

Rate this post

Juniper JN0-636 Certification Exam Dumps with 140 Practice Test Questions

New JN0-636 Exam Dumps with High Passing Rate

Juniper JN0-636: Security, Professional (JNCIP-SEC) certification exam is an excellent way for professionals in the networking and security fields to validate their skills and knowledge of advanced security technologies and solutions. Passing JN0-636 exam demonstrates a candidate’s commitment to their career and their ability to apply their knowledge to real-world situations.

Q20. What are two valid modes for the Juniper ATP Appliance? (Choose two.)

flow collector

event collector

all-in-one

core

Q21. You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal? (Choose two.)

Configure Microsoft Azure as the service provider (SP).

Configure Microsoft Azure as the identity provider (IdP).

Configure Juniper ATP Cloud as the service provider (SP).

Configure Juniper ATP Cloud as the identity provider (IdP).

Q22. Exhibit

Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.
Referring to the exhibit, which two actions solve this problem? (Choose two)

Configure static NAT on the SRX Series devices.

Connect the competitor network using IPsec policy-based VPNs.

Identify two neutral IPv4 address spaces for address translation.

Configure IPsec Transport mode.

Q23. You are required to deploy a security policy on an SRX Series device that blocks all known for network IP addresses. Which two steps will fulfill this requirement? (Choose two.)

Enroll the devices with Juniper ATP Appliance.

Enroll the devices with Juniper ATP Cloud.

Enable a third-party Tor feed.

Create a custom feed containing all current known MAC addresses.

Q24. You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device.
When committing the configuration, the commit fails.
In this scenario, what would cause this problem?

There is no GRE tunnel between the tenant system and master system allowing SSH traffic

There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface

The SRX1500 device does not support more than two logical interfaces per tenant system

The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/logical-systems- overview.html

Q25. Referring to the exhibit, which two statements are true? (Choose two.)

The data that traverses the ge-0/070 interface is secured by a secure association key.

The data that traverses the ge-070/0 interface can be intercepted and read by anyone.

The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.

The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.

Q26. Exhibit

The highlighted incident (arrow) shown in the exhibit shows a progression level of “Download” in the kill chain.
What are two appropriate mitigation actions for the selected incident? (Choose two.)

Immediate response required: Block malware IP addresses (download server or CnC server)

Immediate response required: Wipe infected endpoint hosts.

Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.

Not an urgent action: Use IVP to confirm if machine is infected.

Q27. What are two important function of the Juniper Networks ATP appliance solution? (Choose two.).

Statistics

Analysis

Detection

Filtration

Q28. Click the Exhibit button.

userehost# run show route
inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
0.0.0.0/0 *[Static/5] 00:05:06
> to 172.16.1.1 via ge-0/0/1.0
172.16.1.0/24 *[Direct/O] 00:05:06
> via ge-0/0/1.0
172.16.1.3/32 *[Local/0] 00:05:07
Local via ge-0/0/1.0
192.168.200.2/32 *[Local/0] 00:05:07
Reject
vr-a.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, – =
Last Active, * = Both
192.168.1.0/24 *[Direct/0] 00:01:05
> via ge-0/0/2.0
192.168.1.1/32 *[Local/0] 00:01:05
Local via ge-0/0/2.0
vr-b.inet.0: 2 destinations, 2 routes (2 active, 0 holddcwn, 0 hidden)
+ = Active Route, – =
Last Active, * = Both
192.168.1.0/24 *[Direct/O] 00:01:05
> via go-0/0/3.0
192.168.1.1/32 *[Local/0] 00:01:05
Local via ge-0/0/3.0
User 1 will access Server 1 using IP address 10.2.1.1.
You need to ensure that return traffic is able to reach User 1 from Server 1.
Referring to the exhibit, which two configurations allow this communication (Choose two.)
[edit security nat static]

user@host# show
rule-set server-nat {
from zone [ untrust ];
rule 1 {
match {
destination-address 10.2.1.1/32;
}
then {
static-nat {
prefix {
192.168.1.2/32;
}
}
}
}
}
[edit security nat static]

user@host# show
rule-set server-nat {
from zone [ junos-host untrust ];
rule 1 {
match {
destination-address 10.2.1.1/32;
}
then {
static-nat {
prefix {
192.168.1.2/32;
routing-instance vr-b;
}
}
}
}
}
[edit security nat static]

user@host# show
rule-set server-nat {
from zone untrust;
rule 1 {
match {
destination-address 10.2.1.1/32;
}
then {
static-nat {
prefix {
192.168.1.2/32;
routing-instance vr-a;
}
}
}
}
}
[edit security nat static]

user@host# show
rule-set in {
from zone untrust;
to zone cust-a;
rule overload {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}

Q29. You want to configure a threat prevention policy.
Which three profiles are configurable in this scenario? (Choose three.)

device profile

SSL proxy profile

infected host profile

C&C profile

malware profile

Q30. Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.

You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.

The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1

Juniper ATP Cloud automatically creates the 3uopi’cioua_Endpoints feed after you commit the security policy.

Q31. Exhibit

Referring to the exhibit, which three statements are true? (Choose three.)

The packet’s destination is to an interface on the SRX Series device.

The packet’s destination is to a server in the DMZ zone.

The packet originated within the Trust zone.

The packet is dropped before making an SSH connection.

The packet is allowed to make an SSH connection.

Q32. Which configurable SRX Series device feature allows you to capture transit traffic?

syslog

traceoptions

packet-capture

archival

Q33. Which statement is true about persistent NAT types?

The target-host-port parameter cannot be used with IPv4 addresses in NAT46.

The target-host parameter cannot be used with IPv6 addressee in NAT64.

The target-host parameter cannot be used with IPv4 addresses inNAT46

The target-host-port parameter cannot be used with IPv6 addresses in NAT64

Q34. Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.) A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q35. Exhibit

Referring to the exhibit, which three statements are true? (Choose three.)

The packet’s destination is to an interface on the SRX Series device.

The packet’s destination is to a server in the DMZ zone.

The packet originated within the Trust zone.

The packet is dropped before making an SSH connection.

The packet is allowed to make an SSH connection.

Q36. You must ensure that your Layer 2 traffic is secured on your SRX Series device in transparent mode.
What must be considered when accomplishing this task?

Layer 2 interfaces must use theethernet-switchingprotocol family.

Security policies are not supported when operating in transparent mode.

Screens are not supported in your security zones with transparent mode.

You must reboot your device after configuring transparent mode.

Q37. Exhibit

You are using traceoptions to verity NAT session information on your SRX Series device Referring to the exhibit, which two statements are correct? (Choose two.)

This packet is part of an existing session.

The SRX device is changing the source address on this packet from

This is the first packet in the session

The SRX device is changing the destination address on this packet 10.0.1 1 to 172 20.101.10.

Loading …

Juniper JN0-636 exam is designed for professionals who are already working in the security domain and want to enhance their skills and credibility. JN0-636 exam is suitable for security professionals who have experience in configuring and managing Juniper security technologies. JN0-636 exam is also suitable for professionals who wish to validate their knowledge and skills in Juniper security technologies. Juniper’s JNCIP-SEC certification is one of the most respected certifications in the security industry, and passing the JN0-636 exam is an essential step towards achieving this certification.

Get JN0-636 Braindumps & JN0-636 Real Exam Questions: https://www.braindumpstudy.com/JN0-636_braindumps.html