5/5 - (2 votes)

Updated Nov-2023 100% Cover Real NCS-Core Exam Questions Make Sure You 100% Pass

NCS-Core dumps Accurate Questions and Answers with Free and Fast Updates

The Nutanix NCS-Core exam consists of 60 multiple-choice questions that must be completed within 90 minutes. NCS-Core exam is computer-based, and candidates can take it at a Pearson VUE testing center or online from the comfort of their own home or office. NCS-Core exam is available in multiple languages, including English, Japanese, French, German, and Chinese.

 

Q89. An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch informationis still not being displayed.
What is causing this problem?

 
 
 
 

Q90. After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?

 
 
 
 

Q91. An administrator is monitoring the Nutanix v5.15-based AOS cluster performance logs and notices that a SQL server VM is greatly exceeding its intended maximum IOPS.The administrator has confirmed that a QoS policy was previously created for the group of VMs this server is a member of.
What are two reasons that this VM would exceed its maximum configured IOPS from the QoS Policy?
(Choose two.)

 
 
 
 

Q92. A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms.
Which action should the administrator take to resolve the NCC errors?

 
 
 
 

Q93. Refer to the exhibit.

A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?

 
 
 
 

Q94. A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected
5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?

 
 
 
 

Q95. Refer to the exhibit.

An administrator receive the warningmassages shown in the exhibit while validating cluster conversion from EXSi to AHV.
What should the administrator do to address this warning in v Center Server?

 
 
 
 

Q96. A customer needs to meet the following requirements for their business critical application:
* SQL Servers must be on specific hosts to lower licensing costs.
* Oracle RAC servers must be on separate hosts for licensing reasons
Which policy or policies should be implemented to meet these requirements?

 
 
 
 

Q97. After a consultant runs Foundation, the imaging process fails.
In which two locations can the consultant find the logs? (Choose two.)

 
 
 
 

Q98. An administrator migrates a VM onto a new Nutanix cluster. After the migration, the administrator observes the following conditions:
* Cluster memory utilization: 64%
* Cluster CPU utilization: 19%
* Clusterstorage utilization: 32%
* Average VM CPU utilization: 25%
* Average VM CPU ready%: 24%
* Average VM memory utilization: 60%
Which two changes should the administrator make to improve VM performance? (Choose two.)

 
 
 
 

Q99. An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?

 
 
 
 

Q100. An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).
Upon investigation, the administrator finds the following:
* All AHV hosts are powered on and the CVMs are running
* Nodes A, B, and C are connected to one top of rack switch
* Nodes D and E are connected to a second top of rack switch
* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?

 
 
 
 

Q101. For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?

 
 
 
 

Q102. A customer recently set up Async Replication between Site A and Site B.
The customer wants to conduct aplanned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?

 
 
 
 

Q103. A consultant has deployed a Nutanix cluster with AOS 5.10.x, then discovers the customer’s environment is running on AOS 5.6.x. The consultant decides to re-image the cluster using the foundation Java applet. During the Foundation discovery, all cluster nodes display a status of Unavailable.
What should the consultant do to resolve the issue?

 
 
 
 

Q104. A consultant creates a Windows VM after installing a new Nutanix cluster running AHV. The consultant has statically assigned an IP address to the VM but it is unable to communicate on the network.
Which action should the consultant take to resolve this issue?

 
 
 
 

Q105. An administrator needs to expand a cluster based on AHV and running on Nutanix G5 hardware with a new Nutanix G7system. The cluster is running AOS 5.10 but the operation fails when expanding the cluster. AOS is running on the new system. There are no issues discovering the node.
Why is the operation failing?

 
 
 
 

Q106. A consultant has deployed a new Nutanix AHV cluster with Foundation. The customer requests separating the management and production traffic in the CVM.
Which feature should the consultant configure?

 
 
 
 

Q107. An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
*Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?

 
 
 
 

Q108. An organizations Nutanix Cluster is based on VMware vSphere. The cluster is configured to download software updates automatically. The administration needs to verify and eventually upgrade VMware hypervisor via Prism Ul.
After logging in to Prism, the administrator receives the message shown:
No available versions for upgrade
What is causing the current state?

 
 
 
 

Q109. Refer to the exhibit.

A Microsoft SQL 2016 deployment is shown in the exhibit. The administrator receives user reports that database queries take too long to return.
Which optimization should be made to this configuration to improve performance?

 
 
 
 

Q110. An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers.
An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)

 
 
 
 

Q111. A consultant notices while assigning VLAN tags to hosts and CVMs in a running cluster, that Prism Element displays alerts indicating a node is down.
What should the consultant do to prevent these alerts?

 
 
 
 

Q112. A consultant is preparing to foundation over a customer network that has the following criteria:
* VLAN segmented network
* VLAN tags on the nodes must be imaged prior to starting the foundation process.
For each node, the consultant has done the following:
* Connected to the Network Crash Cart of the Node
* Logged in using “root” credentials
What should the consultant do next?

 
 
 
 

The Nutanix NCS-Core exam covers a wide range of topics, including Nutanix cluster configuration and management, virtualization, storage and network management, and troubleshooting. It is a comprehensive exam that requires candidates to have a deep understanding of Nutanix core infrastructure solutions and their practical applications. NCS-Core exam is designed to assess the skills and knowledge required to install, configure, and manage Nutanix core infrastructure solutions in a real-world environment.

 

Real NCS-Core Quesions Pass Certification Exams Easily: https://www.braindumpstudy.com/NCS-Core_braindumps.html

         

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw myportal.utt.edu.tt