156-836 Dumps – Kickstart your Career with Real Updated Questions [Q14-Q37]

4.5/5 - (21 votes)

156-836 Dumps – Kickstart your Career with Real Updated Questions

Earn Quick And Easy Success With 156-836 Dumps

CheckPoint 156-836 Certification Exam is a comprehensive exam that covers a wide range of topics related to Check Point Maestro technology. 156-836 exam includes questions on topics such as the architecture of Check Point Maestro, deployment scenarios, network topology and design, high availability, load balancing, and security policies. 156-836 exam also covers advanced topics such as automation, orchestration, and troubleshooting.

Q14. What cannot be learned from the output of asg monitor command?

Uptime

Port status

Security Policy status

Appliances cluster status

Q15. What can be learned from the output of sx_api_ports_dump.py command?

Information about backplane bonds

Information about Security Groups

Orchestrator port status

Information about downlink ports only

Q16. What happens if you apply a hotfix using gClish?

If you apply a hotfix using gclish, it causes an outage for the entire SG as all members reboot at roughly the same time.

If you apply a hotfix using gclish, each SG members installs the hotfix and reboots after waiting it’s turn to do so.

Logical groups “A” and “B” are created. Members of group “A” install and reboot first. Then members of group “B” does the same once reboots have finished with group “A.”

If you apply a hotfix using gclish, the operation will fail because an outage would occur.

Q17. How does HyperSync work in a Dual Site environment?

Each active connection has two local backups (on the local site) and a third backup connection on the second site (remote site.)

Each active connection has a backup connection on the second site (remote site.)

Each active connection has a local backup (on the local site) and a second backup connection on the second site (remote site.)

Each active connection has a local backup (on the local site) and a second backup connection on each of the MHOs.

Q18. What is a security group?

A solution for Security Gateway redundancy and Load Sharing.

A set of appliances of the same model that are collectively managed by the MHO.

A set of network interfaces and individual SGMs assigned to a logical group.

A set of objects in SmartConsole that are responsible for enforcing an access policy.

Q19. Which feature is used to force trusted non-F2F traffic into the fully accelerated path for handling by SecureXL.

Fast Accelerator

hypersync

rate limiting

SecureXL

Q20. What is the purpose of g_tcpdump command?

Collects traffic dump from Sync network

Collects traffic dump from CIN network

The same as tcpdump, just on Scalable Platform

Collects traffic dump from all Active Appliances within Security Group

Q21. Which command should be used to restart Orchestrator service only?

orchd restart

reboot

service orchestrator restart

cpstop; cpstart

Q22. Which command is used to set the number of sites in a Maestro environment?

set maestro orchestrator-site-amount

set maestro configuration orchestrator-site-amount

set maestro configuration orchestrator-site-number

set maestro configuration orchestrator-site-id

Q23. What command should be used for collecting diagnostic information about the orchestrator?

cpinfo

asg perf -v

cpview

orch_info

Q24. What type of cluster can a Security Group can be compared to?

Load Sharing Active / Active

VSLS

Active / Backup

Active / Standby

Q25. There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?

Between 2 and 4

All 10

Q26. There are two appliances within the same Security Group. One of them is connected by One downlink only, another one by Two downlinks. Assuming there’s no NAT and no VPN, what would be proportion of traffic distribution done by Orchestrator?

100%/0%

33%/66%

50%/50%

66%/33%

Q27. Do all MHOs need to be upgraded before starting the SGM upgrades?

During the upgrade process all SGMs should be upgraded before upgrading all of the MHOs.

A minimum of one of the MHOs should be upgraded before starting the SGM upgrades. However, there is no requirement to upgrade all the SGMs during the same maintenance window as the MHO

All MHOs must first be upgraded before starting the SGM upgrades However, there is no requirement to upgrade all the SGMs during the same maintenance window as the MHOs.

MHOs do not need to be upgraded at all because Maestro supports the use of different versions between the MHOs and SGMs.

Q28. What happens when you make changes from Clish on the SMO Master?

The changes are synchronized to the SMS/MDS as a backup.

The changes are synchronized to the MHO as a backup.

Changes are only applied on the SMO Master.

Changes are applied to all members in the SG.

Q29. Maestro allows running commands globally in Expert mode by using global prefixes, such as:

asg all

g_all

all

global

Q30. When working with Maestro, what is the difference between using Clish and gClish?

Clish commands are for testing purposes only and cannot be saved, gClish commands apply to all SG members, by default.

Clish commands apply to all UP SG members, by default. gClish commands apply to all SG members, by default.

Clish commands are run on the SG members. gClish commands are run on the MHO and applied to all connected SG members in a specified group.

Clish commands apply only to a specific SG member. gClish commands apply to all UP SG members, by default.

Q31. What is the Correction Layer mechanism?

Ensures asymmetric traffic is handled properly, especially in the case of NAT or VPNs.

The load-balancing mechanism used by the MHO.

The MHO’s distribution algorithm which determines the handling SGM for a given connection.

Enforces the access policy on the SGMs and synchronizes the enforcement verdict to other SGMs in the SG.

Q32. There are two 10Gbps dual-port NICs and one 40Gbps NIC installed on a 23800 Appliance in slots 1, 2 and 3 accordingly. Which interfaces should be connected to Orchestrator 1 for downlinks’ intra- orchestrator redundancy when using two Orchestrators?

Port 1 in Slot 2 and Port 2 in Slot 1

This configuration is not supported

Any pair of available ports

Port 1 in Slot 1 and Port 2 in Slot 1

Q33. What is the difference between Dual-Site and Dual-Room?

Dual-Room is a kind of Dual-Site deployment within the same building

Dual-Room is Active / Standby and Dual-Site is Active / Active

Dual-Room is a Single-Site deployment where all Appliances are connected to both orchestrators

They are the same

Q34. When security policy is installed

All SGMs receive the security policy and one by one performs an independent policy verification. Then, all SGMs simultaneously install the policy.

The SMO Master receives the policy and performs a policy verification the policy is installed on the SMO Master, the SMO Master broadcasts the available package, other membersretrieve the new policy from the SMO Master, then the non-SMO Master SGMs install the policy.

All SGMs receive the security policy and simultaneous policy installation occurs.

The policy is installed on the SMO, the SMO Master broadcasts the available package, other members retrieve the new policy from the SMO Master and perform an independent policy verification, then the non-SMO Master SGMs install the policy.

Q35. At a minimum, how many management and Uplink ports does a SG require?

Only one of the two interfaces is needed for the Security Group.

Neither are required.

Two of each.

One each.

Q36. What is the max amount of Orchestrators in Dual-site setup?

2 per Security Group

4 per Security Group

Q37. HealthCheck Point _____

is a self-updatable suite of tools for MHOs with the capability to assess the health of the system and provide a timeline of critical and informative events that might have occurred in a production system.

performs a system health check and is meant to replace both a CPInfo and the health check script.

can be used to let you visualize the Firewall topology for the SG and view live statistics, which includes throughput, problem notes, and CPU utilization.

is a self-updatable suite of tools for SGMs with the capability to assess the health of the system, visualize the Firewall topology, provide a timeline of critical and informative events that might have occurred in a production system.

CheckPoint 156-836 (Check Point Certified Maestro Expert – R81 (CCME)) Exam is a certification exam that tests an individual’s expertise in handling and managing the Check Point Maestro solution. 156-836 exam is intended for IT professionals who possess advanced knowledge and skills in designing, deploying, configuring, and troubleshooting complex Check Point Maestro environments. 156-836 exam is designed to validate the candidate’s ability to manage a large-scale, distributed, and high-performance network security infrastructure using the Check Point Maestro solution.

Free 156-836 pdf Files With Updated and Accurate Dumps Training: https://www.braindumpstudy.com/156-836_braindumps.html