[2025] Use Valid Exam HPE2-T37 by BraindumpStudy Books For Free Website [Q26-Q42]

Rate this post

[2025] Use Valid Exam HPE2-T37 by BraindumpStudy Books For Free Website

Free HPE Product Certified – OneView [2022] HPE2-T37 Official Cert Guide PDF Download

HPE2-T37 exam is a certification exam that is offered by HPE. HPE2-T37 exam is designed to test your knowledge of HPE OneView, which is a powerful management platform that allows you to manage your HPE infrastructure from a single interface. Passing the HPE2-T37 exam will demonstrate your ability to use HPE OneView effectively and efficiently.

NO.26 How can your customer obtain the PowerShell Library for HPE OneView?

It is available for customers with more than 100 compute nodes.

It is a part of the OneView for VMware vCenter Library.

It is available as a part of a service contract for HPE compute nodes.

It can be downloaded from Microsoft PowerShell Gallery.

Your customer can obtain the PowerShell Library for HPE OneView by downloading it from the Microsoft PowerShell Gallery. The library is publicly available and can be installed using standard PowerShell commands. This allows users to automate and script HPE OneView operations, enhancing efficiency and integration with existing workflows.
Installation Command:
Install-Module -Name HPOneView.XXX
(Replace ‘XXX’ with the specific version number)

NO.27 Refer to the exhibit.

Which statement about server connections is true?

LACP on downlinks is configured for Ethernet connection

All connections within the server profile are using physical IDs

Ethernet connection is configured to boot from PXE

Storage array is connected directly to an HPE Synergy frame

NO.28 You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.
In which scenario should you set redundancy for master modules to be highly available?

When storm control or loop protection will be enabled for Virtual Connect modules

When each of the frames has two Virtual Connect modules installed

When each Virtual Connect module is installed in different frame

When each Virtual Connect module is installed in different fabric

NO.29 Refer to the exhibit.

What does selecting the “Permanent” option mean?

Any write operation to the logical JBOD will be immediately written, bypassing the cache.

The logical JBOD will not be deleted, even when server profile is deleted.

Deleting the logical JBOD is possible only from the CLI with Administrator privileges.

To remove data from the logical JBOD, the “erase on delete” option must be selected.

NO.30 Which locations are supported for HPE OneView remote scheduled backup? (Choose two.)

SCP

HTTPS

SFTP

HTTP

FTP

Scheduled to be uploaded to the remote location.

NO.31 Which component managed using HPE OneView can obtain an IP address from the subnet and address range defined in the HPE OneVlew settings?

Any supported HPE storage array

A Rack Management Controller

An iL0 in an HPE Synergy compute node

An iL0 in an HPE ProLiant server

An iLO in an HPE ProLiant server can obtain an IP address from the subnet and address range defined in the HPE OneView settings. HPE OneView allows administrators to define IP address pools for various components, including iLO management addresses. When a server is added to HPE OneView, it can automatically assign an IP address to the iLO from the predefined range.
* Option A: Storage arrays typically have their IP configurations managed separately.
* Option B: Rack Management Controllers may not be configured using IP pools in HPE OneView.
* Option C: HPE Synergy compute nodes use a different method (the Frame Link Module) for management network configuration.

NO.32 You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?

The sFlow option must be enabled and configured.

Both FlexNlCs must be connected to the same network.

The Compute Module profile must have exactly two connections defined.

An upgrade license must be purchased and deployed.

NO.33 Which statement about the volume template is true?

Users will be able to change sharing type and volume capacity

A volume created using this template will not support deduplication

A volume created using this template mil not support snapshots

Users will be able to select storage pool during volume creation

NO.34 Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

Explanation:
Networks

NO.35 Click option that will allow you to select a FlexNIC function for the specified connection.

NO.36 How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

NO.37 Your customer wants to manage their HPE Superdome Flex using HPE OneView.
Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

Reference: http://itdoc.hitachi.co.jp/manuals/rv3000/hard/SDF/Server/SDF280/P06150-401a.pdf

NO.38 Which statement about the volume template is true?

Users will be able to change sharing type and volume capacity

A volume created using this template will not support deduplication

A volume created using this template mil not support snapshots

Users will be able to select storage pool during volume creation

NO.39 You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.
What must you do next?

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

NO.40 For HPE Primera, match each task with the management tool that can be used to perform it.

NO.41 How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03934110

NO.42 After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware.
What can cause this issue?

IL0 firmware of the replacement server is different than firmware in broken server.

Server profile affinity is configured to Device Day + server hardware.

The enclosure group has to be updated to match the original enclosure group.

The replacement server has more memory or CPUs than broken machine.

Loading …