[Nov 28, 2025] Valid NSE7_SDW-7.2 Test Answers & NSE7_SDW-7.2 Exam PDF [Q60-Q80]

Rate this post

[Nov 28, 2025] Valid NSE7_SDW-7.2 Test Answers & NSE7_SDW-7.2 Exam PDF

Valid NSE 7 Network Security Architect NSE7_SDW-7.2 Dumps Ensure Your Passing

Fortinet NSE7_SDW-7.2 Exam Syllabus Topics:

Topic	Details
Topic 1	Rules and Routing: Understanding SD-WAN Rules and Routing is crucial for directing traffic effectively. This topic of the NSE7_SDW-7.2 exam evaluates the capabilities of Fortinet network and security professionals to configure SD-WAN rules and routing.
Topic 2	SD-WAN Troubleshooting: Troubleshooting SD-WAN issues, including rules, routing, and ADVPN, is vital for maintaining network reliability. This section of the Fortinet NSE 7 – SD-WAN 7.2 exam tests the ability to diagnose and resolve SD-WAN problems using diagnostic commands and monitoring tools, ensuring robust and uninterrupted network operations.
Topic 3	Centralized Management: This area focuses on deploying and managing SD-WAN through FortiManager, including using IPsec templates and SD-WAN Overlay Templates. Mastery here demonstrates the abilities of Fortinet network and security professionals to streamline SD-WAN configuration, enhance security, and maintain consistent policies across multiple sites.
Topic 4	SD-WAN Configuration: This topic assesses skills of Fortinet network and security professionals in setting up basic SD-WAN environments, including configuring Direct Internet Access (DIA), SD-WAN Members, and Performance Service Level Agreements (SLAs). Proficiency here ensures the ability to design efficient and resilient SD-WAN configurations.
Topic 5	SD-WAN Overlay Design and Best Practices: It focuses on the deployment of hub-and-spoke IPsec topologies and configuring ADVPN. Proficiency in this topic ensures that Fortinet network and security professionals can implement effective and reliable SD-WAN overlays tailored to organizational needs.

NEW QUESTION 60
Refer to the exhibit.

Based on the exhibit, which two actions does FortiGate perform on sessions after a firewall policy change?
(Choose two.)

FortiGate flushes all sessions.

FortiGate terminates the old sessions.

FortiGate does not change existing sessions.

FortiGate evaluates new sessions.

NEW QUESTION 61
Exhibit.

The exhibit shows the output of the command diagnose sys sdwan health-check status collected on a FortiGate
device. Which two statements are correct about the health check status on this FortiGate device? (Choose
two.)

The health-check VPN_PING orders the members according to the lowest jitter.

The interface T_INET_1 missed one SLA target.

There is no SLA criteria configured for the health-check Level3_DNS.

The interface T_INET_0 missed three SLA targets.

NEW QUESTION 62
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )

Traffic has matched none of the FortiGate policy routes.

Matched traffic failed RPF and was caught by the rule.

The FIB lookup resolved interface was the SD-WAN interface.

An absolute SD-WAN rule was defined and matched traffic.

NEW QUESTION 63
Refer to the exhibit.

Which conclusion about the packet debug flow output is correct?

The original traffic exceeded the maximum packets per second of the outgoing interface, and the packet was dropped.

The reply traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.

The original traffic exceeded the maximum bandwidth of the outgoing interface, and the packet was dropped.

The original traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.

NEW QUESTION 64
Which statement about using BGP routes in SD-WAN is true?

Learned routes can be used as dynamic destinations in SD-WAN rules.

You must use BGP to route traffic for both overlay and underlay links.

You must configure AS path prepending.

You must use external BGP.

NEW QUESTION 65
Which statement about SD-WAN zones is true?

An SD-WAN zone can contain only one type of interface.

An SD-WAN zone can contain between 0 and 512 members.

You cannot use an SD-WAN zone in static route definitions.

You can configure up to 32 SD-WAN zones per VDOM.

NEW QUESTION 66
What are two benefits of choosing packet duplication over FEC for data loss correction on noisy links?
(Choose two.)

Packet duplication can leverage multiple IPsec overlays for sending additional data.

Packet duplication does not require a route to the destination.

Packet duplication supports hardware offloading.

Packet duplication uses smaller parity packets which results in less bandwidth consumption.

NEW QUESTION 67

Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)

The traffic shaper drops packets if the bandwidth is less than 2500 KBps.

The measured bandwidth is less than 100 KBps.

The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.

The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.

NEW QUESTION 68
Which statement about using BGP for ADVPN is true?

You must use BGP to route traffic for both overlay and underlay links.

You must configure AS path prepending.

You must configure BGP communities.

IBGP is preferred over EBGP, because IBGP preserves next hop information.

NEW QUESTION 69
Refer to the exhibits.

An administrator is testing application steering in SD-WAN. Before generating test traffic, the administrator
collected the information shown in exhibit A.
After generating GoToMeeting test traffic, the administrator examined the respective traffic log on
FortiAnalyzer, which is shown in exhibit B. The administrator noticed that the traffic matched the implicit
SD-WAN rule, but they expected the traffic to match rule ID 1.
Which two reasons explain why the traffic matched the implicit SD-WAN rule? (Choose two.)

FortiGate did not refresh the routing information on the session after the application was detected.

Port1 and port2 do not have a valid route to the destination.

Full SSL inspection is not enabled on the matching firewall policy.

The session 3-tuple did not match any of the existing entries in the ISDB application cache.

NEW QUESTION 70
Exhibit.

The exhibit shows the output of the command diagnose sys sdwan health-check status collected on a FortiGate device. Which two statements are correct about the health check status on this FortiGate device? (Choose two.)

The health-check VPN_PING orders the members according to the lowest jitter.

The interface T_INET_1 missed one SLA target.

There is no SLA criteria configured for the health-check Level3_DNS.

The interface T_INET_0 missed three SLA targets.

NEW QUESTION 71
Refer to the exhibit.

Based on the exhibit, which two actions does FortiGate perform on traffic passing through port2? (Choose
two.)

FortiGate does not change the routing information on existing sessions that use a valid gateway, after a
route change.

FortiGate performs routing lookups for new sessions only, after a route change.

FortiGate always blocks all traffic, after a route change.

FortiGate flushes all routing information from the session table, after a route change.

NEW QUESTION 72
Refer to the exhibit.

Based on the output, which two conclusions are true? (Choose two.)

There is more than one SD-WAN rule configured.

The SD-WAN rules take precedence over regular policy routes.

Theall_rulesrule represents the implicit SD-WAN rule.

Entry1(id=1)is a regular policy route.

NEW QUESTION 73
Refer to the exhibit.

Which statement explains the output shown in the exhibit?

FortiGate performed standard FIB routing on the session.

FortiGate will not re-evaluate the session following a firewall policy change.

FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.

FortiGate must re-evaluate the session due to routing change.

NEW QUESTION 74
Refer to the exhibit.

Which two SD-WAN template member settings support the use of FortiManager meta fields? (Choose two.)

Cost

Interface member

Priority

Gateway IP

NEW QUESTION 75
In a hub-and-spoke topology, what are two advantages of enabling ADVPN on the IPsec overlays? (Choose
two.)

It provides the benefits of a full-mesh topology in a hub-and-spoke network.

It provides direct connectivity between spokes by creating shortcuts.

It enables spokes to bypass the hub during shortcut negotiation.

It enables spokes to establish shortcuts to third-party gateways.

NEW QUESTION 76
Refer to the exhibit.

The exhibit shows the BGP configuration on the hub in a hub-and-spoke topology. The administrator wants BGP to advertise prefixes from spokes to other spokes over the IPsec overlays, including additional paths.
However, when looking at the spoke routing table, the administrator does not see the prefixes from other spokes and the additional paths.
Based on the exhibit, which three settings must the administrator configure inside each BGP neighbor group so spokes can learn other spokes prefixes and their additional paths? (Choose three.)

Set additional-path to send

Enable route-reflector-client

Set advertisement-interval to the number of additional paths to advertise

Set adv-additional-path to the number of additional paths to advertise

Enable soft-reconfiguration

NEW QUESTION 77
Refer to the exhibits.

Exhibit A shows two IPsec templates to define Branch_IPsec_1 and Branch_IPsec_2. Each template defines a VPN tunnel.
Exhibit B shows the error message that FortiManager displayed when the administrator tried to assign the second template to the FortiGate device.
Which statement best explain the cause for this issue?

You can assign only one template with a tunnel of fype static to each FortiGate device

You can define only one IPsec tunnel from branch devices to HUB1.

You can assign only one IPsec template to each FortiGate device.

You should review the branch1_fgt configuration for the already configured tunnel with the name HUB1-VPN2.

NEW QUESTION 78
Exhibit.

The exhibit shows VPN event logs on FortiGate. In the output shown in the exhibit, which statement is true?

There are no IPsec tunnel statistics log messages for ADVPN cuts.

There is one shortcut tunnel built from master tunnel T_MPLS_0.

The VPN tunnel T_MPLS_0 is a shortcut tunnel.

The master tunnel T_INET_0 cannot accept the ADVPN shortcut.

NEW QUESTION 79
Refer to the exhibit.

An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to
the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over
T_INET_0_0. However, the traffic is routed over T_INET_1_0.
Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)