[Q26-Q49] Updated JN0-481 Dumps PDF – JN0-481 Real Valid Brain Dumps With 78 Questions!

5/5 - (3 votes)

Updated JN0-481 Dumps PDF – JN0-481 Real Valid Brain Dumps With 78 Questions!

100% Free JN0-481 Exam Dumps Use Real JNCIS-DC Dumps

Q26. When editing a device configuration to install some manual changes, which procedure should be followed?

Edit the configuration on the device directly by the CLI; the changes will automatically be adjusted in the Juniper Apstra configuration

Edit the pristine configuration of the device.

Add a persistent change to a device configuration with a configlet.

Delete the device from the Juniper Apstra system, change the configuration, then re-import the device.

Q27. You are installing a Juniper Apstra server in your data center. You have multiple users that will be expected to configure, manage, and carry out operational tasks in your data center. You have decided to implement remote user authentication for the role-based access control of your Apstra server. In this scenario, which three methods are supported? (Choose three.)

TACACS+

LDAP

RADIUS

SAML

Auth0

Q28. Which statement is correct about making changes to a predefined device profile in Juniper Apstra?

The changes you make to a predefined device profile will be discarded and overwritten when upgrading the Apstra server version.

The processor load on the Apstra server will be negatively impacted when changes are made to a predefined device profile.

Changing the predefined device profile will also affect deployed devices that use the same profile.

You must reboot the Apstra server after changes are made to a predefined device profile before they will become active.

Q29. Using Juniper Apstra. which component is defined in a template?

the leaf-to-spine interconnection

the speed of the links between the spine devices and the leaf devices

the number of spine devices in a topology

the definition of IP pools

Q30. Referring to the exhibit, which statement is correct?

The gray-solid primitives indicate further configuration is requited.

The gray-solid primitives indicate that they ate incompatible with the connectivity template design.

The red-striped primitives indicate that they are incompatible with the connectivity template design.

The red-striped primitives indicate that further configuration is required.

Q31. You must configure a static route for traffic to exit a configured routing zone. In the Juniper Apstra Ul, where would you accomplish this task?

under Active -> Virtual -> Routing Zones

under Staged -> Virtual -> Routing Zones

under Active -> Connectivity Templates

under Staged -> Connectivity Templates

Q32. Within Managed Devices in the Juniper Apstra Ul, you notice that several devices have the OOS- Quarantined status. The devices cannot be added to any blueprint. Which action would solve this problem?

Acknowledge the device.

Fix the hardware issues with the quarantined devices.

Install the agent, even though connectivity is established.

Upload a new pristine configuration.

Q33. You use Juniper Apstra to enable a new VXLAN virtual network. Which two components would be automatically derived in this situation? (Choose two.)

IP subnet

VLAN-ID

VXLAN VNI

Route Zone

Q34. When working with logical devices, you specify where each port group is connected. In this scenario, which two Juniper Apstra Ul options are available to the operator? {Choose two.)

router

unused

generic

firewall

Q35. Which two actions are required during Juniper Apstra’s deploy phase? (Choose two.)

Assign device profiles to the blueprint.

Assign user roles to the blueprint.

Assign interlace maps to the blueprint.

Assign resources to the blueprint.

Q36. In the Juniper Apstra Ul. which two resource types would be created in the Resources menu?
(Choose two.)

bridge domain identifier (BDI)

DHCP pools

ASN pools

IP pools

Q37. The 10.100.0.0/16 route is being advertised into your BGP IP fabric. ECMP load balancing has been properly enabled on all devices.
In this scenario, how many routes will the leaf device in AS 65000 receive for the 10.100.0.0/16 prefix?

Q38. Which two statements are correct regarding a pristine configuration in Juniper Apstra? (Choose two.)

It is the configuration file placed on the device when decommissioning the device.

It is the device’s currently active configuration.

It Is the configuration file on a device before acknowledgment in Apstra.

It is the device’s previously active configuration.

Q39. Which two statements ate correct about the information shown in the exhibit? (Choose two.)

The system is fully managed by Juniper Apstra.

The device shown is a generic system.

Four physical interfaces exist in a LAG facing the leaf pair.

The physical ports are not part of the LAG.

Q40. Which fabric type should be chosen in a template to create a five-stage Clos?

collapsed

circuit switched

rack-based

pod-based

Q41. What is one indicator in the Apstra UI that implies that changes to a blueprint are ready to be committed?

Interface maps have been assigned through Device Profiles.

Each assigned device has been set to Deploy mode.

The Staged tab turns green

The Staged tab turns yellow

Q42. Referring to the exhibit, what is the minimum information you must add to create a new routing zone?

VRF Name only

VRF Name and Routing policies

VRF Name, VLAN ID. And VNI

VRF Name, VLAN ID, VNI, Routing Policies

Q43. Which three statements describe intent-based analytics? (Choose three.)

It indicates when device operating versions require updating.

It is a real-time information processing pipeline.

It is used to establish network performance baselines.

It alerts the network operator when network performance moves away from the baseline.

It collects information from vendor websites.

Q44. Which two protocols can be used to advertise EVPN routes? (Choose two.)

IS-IS

MP-EBGP

MP-IBGP

OSPF

Q45. You are creating a new template that will connect two rack based templates together. Which rack type should be used to accomplish this rask?

collapsed

rack based

isolated

pod based

Q46. In the Juniper Apstra Ul, which three resources are assigned under the Resources menu?
(Choose three.)

VTEP pools

ASN pools

VNI pools

logical device pools

IP address pools

In the Juniper Apstra UI, the Resources menu allows you to create and manage global and local resources that are used for various elements of the network design and configuration. The Resources menu includes the following three types of resources that can be assigned to the network devices and virtual networks:
ASN pools: These are pools of autonomous system numbers (ASNs) that are used for the underlay routing protocol (EBGP) between the leaf and spine devices. You can create ASN pools with either 2-byte or 4-byte ASNs, and assign them to the logical devices in the blueprint. VNI pools: These are pools of virtual network identifiers (VNIs) that are used for the overlay network (VXLAN) between the end hosts. You can create VNI pools with a range of VNIs, and assign them to the virtual networks in the blueprint.
IP address pools: These are pools of IPv4 or IPv6 addresses that are used for various purposes in the network, such as the loopback addresses for the devices, the IP prefixes for the virtual networks, the host IP addresses for the end hosts, and the gateway IP addresses for the IRB interfaces. You can create IP address pools with a range of IP addresses, and assign them to the logical devices and virtual networks in the blueprint.
The following two types of resources are not assigned under the Resources menu:
VTEP pools: These are not resources that can be created or assigned by the user. VTEPs are VXLAN tunnel endpoints that are automatically generated by the Apstra server based on the loopback IP addresses of the devices. VTEPs are used as the source and destination IP addresses for the VXLAN tunnels in the overlay network.
Logical device pools: These are not resources that can be created or assigned by the user.
Logical device pools are groups of logical devices that share the same role, interface map, and resource assignments in the blueprint. Logical device pools are used to simplify the network design and configuration by applying the same settings to multiple devices.

Q47. You are receiving cable, interface, and BGP anomalies from several devices within the data center fabric. In Juniper Apstra, how would you troubleshoot these types of errors?

In the Ul, go to Time Voyager and revert to the last working version.

In the Ul, access the console to the devices and review the interface states.

In the Ul, go to Devices and confirm that agent connectivity is fine.

In the Ul, verify device connectivity by consulting the cable map.

Q48. In the case of IP Clos data center five-stage fabric design, what are two rotes of the super spines? (Choose two.)

Super spines are used to interconnect two different data center pods.

Super spines connect to all spine devices within the five-stage architecture.

Super spines are used to connect leaf nodes within a data center pod.

Super spines are always connected to an external data center gateway.

Q49. A member of your organization made changes to a predefined interface map using Juniper Apstra. Which two statements are correct in this scenario? (Choose two.)

Changes to interface maps in the global catalog do not affect interface maps that have already been imported into blueprint catalogs

Any changes made to predefined interface maps are discarded when Apstra is upgraded.

Changes made to predefined interface maps will not have an impact on the Apstra software.

Changes to interface maps in the global catalog will raise anomalies that may need to be addressed at the next commit.

Pass Your JN0-481 Exam Easily With 100% Exam Passing Guarantee: https://www.braindumpstudy.com/JN0-481_braindumps.html

Tags: JN0-481 Braindump Free, JN0-481 dumps cost, JN0-481 exam study solutions, JN0-481 latest test camp materials, JN0-481 new practice questions pdf, JN0-481 valid test questions vce, JN0-481 visual cert test

Exam Study Guide & Braindumps

[Q26-Q49] Updated JN0-481 Dumps PDF – JN0-481 Real Valid Brain Dumps With 78 Questions!

Leave a Reply Cancel reply