JN0-460 Study Guide Latest [Jan 25, 2026] Realistic Verified JN0-460 Dumps [Q31-Q53]

Rate this post

JN0-460 Study Guide: Latest [Jan 25, 2026] Realistic Verified JN0-460 Dumps

JN0-460 Questions & Practice Test are Available On-Demand

NEW QUESTION 31
Whichthree administrator rolesallow you toclaim switches?(Choose three.)

Network Admin

Installer

Super User

Observer

Helpdesk

NEW QUESTION 32
Which three parameters should be provided through DHCP when using ZTP during a Mist AI greenfield deployment? (Choose three.)

NTP server

NETCONF

name server

IP address

NEW QUESTION 33
Which action would site-level network administrators be able to perform?

create a config template

modify an RF template

reboot an access point

assign access points to the site

NEW QUESTION 34
Which three switch testing tools are available when using Wired Assurance?(Choose three.)

bounce port

iPerf

ping

load factory-default

cable test

NEW QUESTION 35
A customer has purchased five new switches and assigned them to a site.
In the configuration hierarchy, how should a user configure thename or roleof each switch?

Configure names and roles on the site-specific configuration.

Configure additional CLI commands on each switch.

Configure each switch individually on the Switch Configuration menu under the Switches menu.

Add names and roles of each switch to the organization-level templates.

NEW QUESTION 36
Which of the following are true regarding the data and control plane operations in EVPN-VXLAN?
(Select two)

EVPN provides a control plane for VXLAN to learn MAC addresses

VXLAN uses BGP to encapsulate data packets

EVPN allows for the separation of underlay and overlay networks

VXLAN relies solely on OSPF for data plane learning

NEW QUESTION 37
You are asked to forward event messages from Mist to an external log collector.
In this scenario, which feature would enable this capability?

syslog

webhooks

NETCONF

SNMP traps

NEW QUESTION 38
What are three requirements for using ZTP during a Mist AI greenfield provisioning? (Choose three.)

Junos Space

Claim code

SNMP server

Internet access

DHCP server

NEW QUESTION 39
You are asked to forward event messages from Mist to an external log collector.
Which feature enables this capability?

Syslog

Webhooks

NETCONF

SNMP Traps

NEW QUESTION 40
Which three steps should be part of the campus fabric deployment?(Choose three.)

Define the physical connections.

Define the networks of interest.

Configure the DNS server.

Choose the topology.

Configure the group-based policy (GBP) tag.

NEW QUESTION 41
What advantage does multipath forwarding in EVPN offer for campus networks?

Decreases bandwidth utilization

Increases network redundancy and bandwidth

Simplifies network design by eliminating the need for redundancy

Restricts the use of multiple paths to prevent loops

NEW QUESTION 42
What are two benefits of deploying EVPN in a campus network? (Choose two.)

active-active forwarding

increased ARP flooding

control plane mac address learning

control plane encapsulation

NEW QUESTION 43
Which of the following are features of managing switches with MistAI Wired Assurance? (Select two)

Automatic switch configuration rollback

Real-time gaming

AI-driven insights for switch health

Manual switch discovery

NEW QUESTION 44
What arethree wired Service Level Expectations (SLEs)that compriseJuniper Mist Wired Assurance?(Choose three.)

Capacity

Successful Connects

Switch Health

Coverage

Throughput

NEW QUESTION 45
What are two unique advantages about configuration automation in Wired Assurance? (Choose two.)

100% open APIs

client SLEs

programmable workflows

switch insights

NEW QUESTION 46
Referring to the exhibit, which statement is correct about thePost-Install user’s role?

It is used for help-desk monitoring and workflow for all sites.

It has access limited to installing APs and switches at all sites.

It has read-only access to all sites.

It has full access to all sites.

NEW QUESTION 47
Which two statements are correct about switch adoption?(Choose two.)

Greenfield switch adoption requires cloud-enabled switches with a claim or activation code.

Switch adoption uses SSH over TCP port 443.

Switch adoption requires Mist AP.

Brownfield switch adoption requires manual adoption and is used for switches that do not have a claim or activation code.

NEW QUESTION 48
Which statement about RadSec is correct?

RadSec allows RADIUS authentication over TCP and TLS.

RadSec allows RADIUS authentication over TCP and SSL.

RadSec allows RADIUS authentication over UDP and TLS.

RadSec allows RADIUS authentication over UDP and SSL.

NEW QUESTION 49
Which two statements are correct about theEVPN-VXLAN control plane?(Choose two.)

The control plane encapsulates the traffic.

The control plane learns the MAC addresses of end-user devices.

The control plane learns the IP addresses of end-user devices.

The control plane rewrites the destination MAC address of the packet.

NEW QUESTION 50
You are asked to identify whether your wired network is experiencing issues withjitter.
Which Juniper MistWired Assurance service-level expectation (SLE)metric provides these details?

Throughput

Successful Connect

Capacity

Switch Health

NEW QUESTION 51
Which statement is correct about anMP-BGP route target?

The route target is used to identify neighboring BGP routers that support the EVPN family.

It is used by BGP to notify other BGP routers that it is EVPN enabled.

It is used to identify the source and destination VRFs of MP-BGP routes.

The route target is automatically created and must be unique for each VRF.

NEW QUESTION 52
To ensure high availability in Campus Fabric Architectures, EVPN multihoming utilizes __________ to avoid single points of failure.

Single connections

Manual interventions

Multiple redundant paths

Fixed routing protocols

NEW QUESTION 53
You have two sites connected to an EVPN network. Each site is using the172.16.1.0/24network for its own respective site.
How does EVPN prevent overlap in this scenario?

It elects a designated forwarder.

It uses a Layer 2 gateway.

It uses a route distinguisher.

It uses an Ethernet segment identifier (ESI).

Juniper JN0-460 Exam Syllabus Topics:

Topic	Details
Topic 1	Wired Assurance Provisioning or Deployment: This section of the exam measures the skills of Network Deployment Specialists and focuses on the provisioning and deployment processes of Wired Assurance. It includes the essential steps and options involved in setting up networks, from configuration templates to deployment methodologies. Candidates learn about provisioning procedures, supported architectures, and the use of site variables to streamline automation and consistency across wired infrastructures.
Topic 2	Wired Assurance Fundamentals: This section of the exam measures the skills of Network Support Engineers and covers the foundational elements of Wired Assurance within the MistAI ecosystem. It introduces candidates to key concepts such as supported devices, solution architecture, and the main features and components that define Wired Assurance functionality. Additionally, it highlights how MistAI accounts, analytics, and subscriptions integrate to deliver intelligent insights for network performance and operations.
Topic 3	Campus Fabric Architecture: This section of the exam measures the skills of Network Design Engineers and focuses on understanding and deploying Campus Fabric Architectures. It introduces essential design concepts such as EVPN multihoming, IP Clos architecture, and micro-segmentation. The section also compares CRB and ERB models, explains scaling requirements, and highlights how the Campus Fabric Core-Distribution design supports high-performance, scalable, and secure enterprise networks.
Topic 4	Campus EVPN-VXLAN: This section of the exam measures the skills of Data Center Network Engineers and explores the key principles of VXLAN and EVPN technologies. Candidates learn about Layer 2 tunneling, data and control plane operations, and the functions of VTEPs and VXLAN gateways. Additionally, it covers advanced EVPN concepts such as multipath routing, route types, and identifiers. The section concludes with a focus on MAC learning and policy applications to ensure efficient, scalable, and resilient network fabrics.
Topic 5	Wired Assurance Management or Operations: This section of the exam measures the skills of Network Operations Engineers and focuses on the management and operational aspects of Wired Assurance. It covers switch management, port profiles, and dynamic port configuration to ensure optimal network performance. The section also explores service-level expectations, client insights, and the use of APIs for improved monitoring and automation. Candidates gain an understanding of how MistAI enables proactive management and predictive troubleshooting to maintain service quality.