MTCNA PDF Pass Leader, MTCNA Latest Real Test [Q106-Q129]

Q106. Choose all valid hosts address range for subnet 15.242.55.62/27

Q107. What command is used to create a backup configuration?

Q108. How many collision domains are created when you segment a network with a 12-port switch?

Q109. Which is a default baud-rate of currently manufactured RouterBOARDs?

Q110. Which of the following is true for connection tracking

Q111. What are the two main types of access control lists (ACLs)?
Standard
IEEE
Extended
Specialized

Q112. Collisions are possible in fullduplex Ethernet networks

Q113. What letters appear next to a route, which is automatically created by RouterOS when user adds a valid address to an active interface?

Q114. Select minimal set of software packages in RouteOS required to configuring a wireless AP

Q115. In RouterOS queue configurations the word “total” ussually represents

Q116. Mark the queue types that are available in RouterOS

Q117. Which of the following Routes statuses are possible?

Q118. Which of the following is NOT a valid MAC Address?

Q119. Which statements are true regarding ICMP packets?
They acknowledge receipt of a TCP segment.
They guarantee datagram delivery.
They can provide hosts with information about network problems.
They are encapsulated within IP datagrams.

Q120. Is ARP used in the IPv6 protocol?

Q121. To use masquerade, you need to specify

Q122. What configuration is added by /ip Hot-Spot setup command? (select all that apply)

Q123. Why is it useful to set a Radio Name on the radio interface?

Q124. A PC with IP 192.168.1.2 can access internet, and static ARP has been set for that IP address on gateway.
When the PC Ethernet card failed, the user change it with a new card and set the same IP for it. What else should be done? [multiple answers]

Q125. Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?

Q126. DHCP server is configured on a router’s ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Possible IP pools, that can be used by this DHCP server, are:

Q127. Mark all packages required for PPPoE server on MikroTik RouterOS

Q128. What does this simple queue do (check the image)?

Q129. Evaluate the following information:
Access Point configuration:
— wlan1 is in ‘AP-Bridge’ mode
— Bridge1 has wlan1 and ether1 as ports
CPE configuration:
— wlan1 is in ‘Station-Bridge’ mode
— Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.