[Jan 24, 2025] Get New 010-151 Practice Test Questions Answers [Q49-Q72]

Rate this post

[Jan 24, 2025] Get New 010-151 Practice Test Questions Answers

010-151 Dumps and Exam Test Engine

Cisco 010-151 certification exam, also known as Supporting Cisco Datacenter Networking Devices (DCTECH), is designed for professionals who want to validate their knowledge and skills in supporting Cisco data center networking devices. Cisco is a well-known leader in the networking industry, and this certification exam provides a comprehensive understanding of Cisco data center technologies, including installation, configuration, and maintenance.

Q49. Which tool is needed when servicing a UCS M5 server?

PCIe slot cover

T-30 Torx driver

M5 DIMM puller

HDD removal tool

Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M5/install/C220M5/ C220M5_chapter_010.html

Q50. Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.)

Cisco Nexus 7718 switch

Cisco Nexus 9508 switch

Cisco Nexus 7710 switch

Cisco Nexus 93128TX switch

Cisco Nexus 6004 switch

Q51. To do a password recovery on a Cisco NX-OS Switch, which option shows the correct syntax to display the bootflash contents at the switch(boot)#?

display bootflash:

show bootflash:

dir bootflash:

find bootflash

Q52. Refer to the exhibit.

What does it mean when item 7 (System Status LED) has a blinking red status?

Major fault with the system board

Power shut down by software

Secure boot validation has failed

Power on Self-Test (POST) failed

Major fault with memory DIMM

Q53. To do a password recovery on a Cisco NX-OS Switch, which option shows the correct syntax to display the bootflash contents at the switch(boot)#?

display bootflash:

show bootflash:

dir bootflash:

find bootflash:

Q54. How does RAID function?

RAID parity information can be stored across multiple RAID levels.

RAID drive group appears to the host computer as multiple physical storage units.

RAID is a scheme used to logically combine several independent disks to form an array or group of drives.

RAID provides data redundancy with either odd parity or even parity.

Q55. Refer to the exhibit.

Which item does 3 represent?

Operate as 40-Gbps QSFP+ ports or as 4 × 10-Gbps SFP+ breakout ports

Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation

Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.

Operate as dedicated 40-Gbps, QSFP+ uplink ports.

Q56. Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

routing

tunneling

handshaking

transporting

Q57. Which transceiver can support 400 Gigabit Ethernet?

QSFP-DD

QSFP+

QSFP28

SFP-DD

Q58. Which two provide connectivity to Fabric Extenders? (Choose two.)

UCS 6300 series

UCS B-Series Servers

UCS 6400 series

UCS S-Series Storage Servers

UCS E-Series Servers

Q59. Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)

Fabric Interconnect firmware

LAN on Motherboard

Cisco UCS Manager

CIMC

System BIOS

Q60. Which SAN protocol uses Ethernet network without IP encapsulation?

IFCP

FCP

iSCSI

FCoE

Q61. Which command saves the active configuration to NVRAM?

copy startup-config running-config

copy active-config backup-config

copy running-config startup-config

copy backup-config active-config

Q62. After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)

Verify the power source to the equipment.

Check for loose HDD cables.

Reseat the DIMMs, CPU, and PCI cards.

Verify that power supplies are receiving power.

Reseat the mezzanine card connector.

Check the CPU sockets for bent pins.
G: Check the Cisco IMC for fan faults.

Q63. Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?

Cisco MDS 9706

Cisco MDS 9709

Cisco MDS 9710

Cisco MDS 9718

Q64. In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller?
(Choose two.)

Dedicated Management port

PCIe ports

KVM Console port

QSFP port

Ethernet LOM port

Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-s-series- storage-servers/s3260-specsheet.pdf page 3

Q65. Which transceiver can support 400 Gigabit Ethernet?

QSFP-DD

QSFP+

QSFP28

SFP-DD

Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/ datasheet-c78-743172.html

Q66. When activating the firmware via UCSM which two firmware versions must be activated at the same time?

UCS Manager and System

UCS Manger and Kernel

CIMC and Kernel

System and Kernel

Q67. Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.

A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.

A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

Q68. Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#

maintenance mode

EXEC mode

local management mode

global configuration mode

Cisco IOS mode

Q69. What is the name of the process to automatically upgrade a new Fabric Interconnect when it is connected to the functioning Fabric Interconnect?

Firmware Policy Process

Auto-Negotiate Process

Auto-Sync Process

Firmware Update Process

Q70. Refer to the exhibit.

Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?